Metallics JFWP21 8 x 1-1/2 in....
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.21
$0.21
Metallics JFWP21 8 x 1-1/2 in. Flat Head Phillips Wood Screws - Steel Zinc - 100qty

Metallics JFWP21 8 x 1-1/2 in. Flat Head Phillips Wood Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JFWP21
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.21
$0.21
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
8 x 1-1/2 in. Flat Head Phillips Wood Screws - Steel Zinc - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Length of Thread: Length = 1 inch then 2/3 thread

  • Features

    • Flat Head with Phillips Drive
    • Steel Zinc Material
    • Screws of nominal lengths too short to accomodate the minimum thread length shall have threads extending as close to the underside of the head as practicable.
    • 8 Diameter, 1-1/2" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.1
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.100 - 0.100 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.292 - 0.332 in.
Fastener Length:
1/1/02
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Flat_Head_Wood_Screw_Steel_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Depth:
0.113 - 0.136
Phillips Recess Diameter:
0.191 - 0.204
Phillips Recess Width:
0.032
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.67 lbs
Product Width:
3 in
Screw Point Type:
Tapered Point
Sub Division:
Electrical-E H2
Thread Per Inch:
15
Thread Standard:
ASME B18.6.1-1997
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Wood Screw
Type2:
Wood Screw
Series:
JFWP
Product Finish:
Zinc
Product Details:
Wood Screw
Product Material:
Steel Zinc

Metallics JFWP21 – Frequently Asked Questions

1) How many screws come in a jar of Metallics JFWP21 wood screws, and can I buy fewer?
The JFWP21 ships as a 100-piece jar, and 100 is the order minimum, so a jar is the smallest unit. Other sizes and quantities are available by request.
2) Will a #8 x 1-1/2 in. flat head wood screw sit flush in a countersunk hole?
Yes, that is what the flat head is for. The head measures 0.292 to 0.332 inch across with a 0.100 inch head height, so an 82 degree countersink of that diameter brings it flush or slightly below the surface. Without a countersink the head will stand proud on hardwood.
3) Are these Metallics wood screws rated for outdoor or wet locations?
These are steel with a zinc finish, which is a dry-location, indoor-duty plating. For exterior work, standing water, or treated lumber, go to a stainless steel flat head wood screw instead; zinc plating will corrode and the screw will fail in the hole.
4) Are Metallics JFWP21 wood screws Buy American or ARRA compliant for a government job?
No. The JFWP21 is not Buy American compliant and is not ARRA compliant; country of origin is listed as multiple. If your project carries a domestic sourcing clause, this part will not clear it.
5) What size Phillips driver do I need for a #8 Metallics flat head wood screw?
A #2 Phillips bit. The recess on the JFWP21 runs 0.191 to 0.204 inch in diameter and 0.113 to 0.136 inch deep, which is standard #2 Phillips geometry. A #1 bit will cam out and chew the recess.
6) How much of a #8 x 1-1/2 in. wood screw is threaded?
On the JFWP21, roughly two thirds of the length carries thread, so about 1 inch of the 1-1/2 inch screw. Thread pitch is 15 threads per inch with a tapered point, so it starts in softwood without a pilot but wants a pilot hole in hardwood or near an edge. Shorter screws in the family that cannot fit the minimum thread length are threaded nearly to the head.
7) What is the exact part number and jar weight for a #8 x 1-1/2 inch zinc flat head Phillips wood screw from Metallics?
Order Metallics JFWP21, from the JFWP series. The 100-count jar weighs 0.67 lbs and the packaged jar measures 3 x 2.15 x 3 inches, which matters if you are palletizing or stocking a shelf bin.
How fast can I get the Metallics JFWP21 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFWP21 come with a warranty?
Absolutely. The Metallics JFWP21 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFWP21?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFWP21 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!