You may also like
1/2IN C- BODY IRON OE-LR-STYLE XP
Manufacturer Resources
Product Specs
- Number Of Batteries:
- 0
- Product Type:
- Conduit Outlet Bodies-Explosionproof
- Department:
- Electrical
- Product Material:
- Ductile Iron
Thomas & Betts OELR1-TB – Frequently Asked Questions
1) Is the OELR1-TB an explosionproof conduit body or a standard one?
It is an explosionproof type. The OELR1-TB is catalogued as an explosionproof conduit outlet body, which is why it is a heavy ductile iron casting rather than a light aluminum or die-cast fitting. Standard Form 7 or Form 8 bodies are not interchangeable with it on a hazardous location run.
2) What does the LR in Thomas & Betts OELR1-TB mean for how the conduit enters?
LR is the standard conduit body designation for a left-hand side opening relative to the back: the conduit runs straight through the body and the cover opening is on the left side as you face the back of the fitting. If your access has to be on the right, you want an RL style body instead; if it needs to be on the back face, that is a C or LB style depending on the run.
3) What material is the OELR1-TB conduit body made of, and will it hold up outdoors or in a wet process area?
Ductile iron. That is a considerably tougher casting than gray iron and it is what you would expect on an industrial run exposed to impact, vibration, or washdown. Iron bodies are normally specified where mechanical abuse is a concern; for a corrosive chemical atmosphere a coated or stainless fitting is usually the better call.
4) Does the Thomas & Betts OELR1-TB come with a cover and gasket, or do I order those separately?
The OELR1-TB is the body casting itself. On explosionproof OE style bodies the cover is a separate ordered item, and the gasket with it, so plan on adding the matching 1/2 inch cover to complete the fitting. Check what you have on hand before the truck rolls, because a body without its cover is not a closed system.
5) Can I use the OELR1-TB as a pull point for pulling wire in a 1/2 inch rigid run?
Yes, that is exactly what an LR body is for. It gives you a side opening to make the pull or the directional change in a 1/2 inch run without cutting into a box. Keep in mind it is an explosionproof iron fitting, so it is heavier than a standard body and wants proper support on the conduit either side of it.
6) What part number do I give my distributor for the Thomas & Betts 1/2 inch OE-LR explosionproof body?
Order it as Thomas & Betts OELR1-TB. That single manufacturer part number covers the 1/2 inch OE-LR-style explosionproof ductile iron body, and there are no finish or size options to specify with it.
How fast can I get the Thomas & Betts OELR1-TB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Thomas & Betts OELR1-TB come with a warranty?
Absolutely. The Thomas & Betts OELR1-TB is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Thomas & Betts OELR1-TB?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Thomas & Betts OELR1-TB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.