Metallics JFMP102 1/4-20 x 1-1...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.41
$0.41
Metallics JFMP102 1/4-20 x 1-1/4 in. Flat Head Phillips Machine Screws - Steel Zinc - 100qty

Metallics JFMP102 1/4-20 x 1-1/4 in. Flat Head Phillips Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JFMP102
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.41
$0.41
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
1/4-20 x 1-1/4 in. Flat Head Phillips Machine Screws - Steel Zinc - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Hardness and tensile strength standards are offered as guides only for stainless machine screws. There is currently no national standard for these performance requirements for stainless machine screws.

  • Features

    • 1/4-20 Diameter, 1-1/4" Length
    • Zinc yellow screws are popular in electronics applications.
    • Steel Zinc Material
    • Flat head with Phillips Drive

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.3-1998
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#3
Fastener Head Height:
0.131 - 0.153 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.442 - 0.477 in.
Fastener Length:
1/1/04
Gaging Diameter:
0.424
Hardness:
Rockwell B70-B100
Language Code:
EN
Material Standard:
AISI 1006 - 1022
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Phillips Recess Depth:
0.16
Phillips Recess Diameter:
0.276
Phillips Recess Width:
0.036
Product Group:
Fasteners
Protrusion Gaging Diameter:
0.029 - 0.050 Above
Sub Division:
Electrical-E H2
Tensile Strength:
1900 lb minimum
Thread Per Inch:
20
Thread Standard:
ANSI/ASME B1.1
Thread Type:
UNC
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
FM and FMP
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JFMP102 – Frequently Asked Questions

1) What thread does the Metallics JFMP102 machine screw use, and will it thread into a standard 1/4-20 tapped box or strut nut?
It's a 1/4-20 UNC thread, 20 threads per inch, made to ANSI/ASME B1.1. That's the standard coarse 1/4 inch machine screw thread, so it threads into any 1/4-20 tapped hole, 1/4-20 strut nut, or 1/4-20 nut without an adapter. Length is 1-1/4 inches.
2) Can I use these screws on a federally funded or Buy American job?
No. The JFMP102 machine screws are not Buy American compliant and are not ARRA compliant, with country of origin listed as multiple. If your contract carries a domestic sourcing clause, you'll need a domestically produced fastener instead.
3) What size Phillips driver do I need for these 1/4-20 flat head screws?
A #3 Phillips. The recess is 0.276 inches in diameter and 0.16 inches deep, so a #2 bit will bottom out and cam out under torque. Keep #3 bits on the cart if you're running these by drill.
4) Is the zinc finish on these screws okay for outdoor or wet locations?
The finish is zinc plating over low carbon steel, which is a dry indoor or protected finish. For wet locations, damp exterior boxes or corrosive environments, go with a stainless machine screw in the same 1/4-20 x 1-1/4 size instead, zinc plating will eventually rust through in standing moisture.
5) What's the difference between a machine screw like this and a self-tapping sheet metal screw?
A 1/4-20 UNC machine screw has a straight, uniform machine thread and needs a tapped hole or a nut on the back side, it will not cut its own thread in sheet metal. If you're fastening into a pre-tapped box, strut nut, or threaded insert, this is the right part. If you're driving into untapped sheet metal or a punched hole with no nut behind it, use a self-tapping or thread cutting screw instead.
6) How are the Metallics JFMP102 screws packaged and what's the minimum order?
They come in a jar of 100, and 100 count is the order minimum. Good quantity for a service van or a shop bin rather than a one off repair.
7) Do these 1/4-20 Phillips flat head screws meet a dimensional spec I can submit?
Yes. Head and drive geometry follow ASME B18.6.3-1998 and the thread follows ANSI/ASME B1.1, with a gaging diameter of 0.424 and protrusion gaging of 0.029 to 0.050 above. Those are the figures to cite if a submittal or QA check asks for conformance on the fastener.
8) Can I get this 1/4-20 flat head Phillips screw in other lengths or pack sizes?
The JFMP102 is the 1/4-20 x 1-1/4 inch size in a 100 count jar, and it's part of the Metallics FM and FMP machine screw series. Other sizes and quantities in that series are available by request.
How fast can I get the Metallics JFMP102 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFMP102 come with a warranty?
Absolutely. The Metallics JFMP102 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFMP102?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFMP102 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!