You may also like
1/4 GALV MI 45 ELL
Manufacturer Resources
Product Specs
- Dimensions Specification:
- ASME B16.3
- End Conn Size 1:
- FPT
- End Conn Size 2:
- FPT
- Finish Specification:
- ASTM A-153
- Material Specification:
- ASTM A-197
- Pressure Rating Specification:
- ASME B16.3
- Size 1:
- 0.25
- Size 2:
- 0.25
- Strength:
- STD
- Thread Specification:
- ASME B1.20.1
- Ul Fm:
- Yes
- Department:
- Plumbing
- Product Group:
- Pipe Fittings
- Product Subgroup:
- Elbows
- Product Type:
- 45° Elbow
- Product Finish:
- Galvanized
- Product Material:
- Malleable Iron
- Product Weight:
- 0.11 lbs
ASC Engineered Solutions 311023006 – Frequently Asked Questions
1) What thread does the ASC Engineered Solutions 1/4 inch galvanized malleable iron 45 degree elbow take on each end?
Both ends are 1/4 inch FPT, so female NPT taper thread cut to ASME B1.20.1. It mates with any 1/4 inch male NPT pipe nipple or fitting. There is no male end on this elbow, so if you need to change direction off a female port you will need a nipple between them.
2) Is this a reducing elbow or straight 1/4 by 1/4?
Straight size. Both ports are 1/4 inch, so it turns 45 degrees without changing pipe size. If your run has to step down, you will need a separate bushing or reducer ahead of the elbow.
3) Is this elbow standard weight or extra heavy?
Standard (STD) pattern, rated per ASME B16.3. Extra heavy (XH, Class 300) malleable fittings are a different casting with thicker walls and a higher pressure rating, so do not substitute this one where a drawing calls out Class 300.
4) Is the galvanizing on this fitting hot dip, and will it hold up outdoors?
The coating is galvanized to ASTM A-153, which is the hot dip zinc specification for hardware and fittings. That is the finish specified for exposed, damp, or exterior service rather than an electroplated coat. The body underneath is malleable iron to ASTM A-197.
5) Does the elbow come with sealant or do I need pipe dope?
The fitting ships bare. NPT taper threads seal on the thread flanks, so you still need PTFE tape or a pipe thread sealant rated for the media you are running. Nothing is pre-applied and no nipples are included.
How fast can I get the ASC Engineered Solutions 311023006 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the ASC Engineered Solutions 311023006 come with a warranty?
Absolutely. The ASC Engineered Solutions 311023006 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the ASC Engineered Solutions 311023006?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the ASC Engineered Solutions 311023006 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.