Metallics JFWP49 14 x 1-1/2 in...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.46
$0.46
Metallics JFWP49 14 x 1-1/2 in. Flat Head Phillips Wood Screws - Steel Zinc - 100qty

Metallics JFWP49 14 x 1-1/2 in. Flat Head Phillips Wood Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JFWP49
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.46
$0.46
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
14 x 1-1/2 in. Flat Head Phillips Wood Screws - Steel Zinc - 100qty

  • Features

    • Steel Zinc Material
    • Flat Head with Phillips Drive
    • 14 Diameter, 1-1/2" Length
    • Screws of nominal lengths too short to accomodate the minimum thread length shall have threads extending as close to the underside of the head as practicable.

  • Additional Notes

    • Other sizes and quantities available by request | Length of Thread: Length = 1 inch then 2/3 thread

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.1
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#3
Fastener Head Height:
0.153 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.452 - 0.507 in.
Fastener Length:
1/1/02
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Flat_Head_Wood_Screw_Steel_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Phillips Recess Depth:
0.046 - 0.070
Phillips Recess Diameter:
0.270 - 0.283
Phillips Recess Width:
0.036
Product Group:
Fasteners
Product Height:
3.6 in
Product Length:
3 in
Product Weight:
1.67 lbs
Product Width:
3 in
Screw Point Type:
Tapered Point
Sub Division:
Electrical-E H2
Thread Per Inch:
10
Thread Standard:
ASME B18.6.1-1997
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Wood Screw
Type2:
Wood Screw
Series:
JFWP
Product Finish:
Zinc
Product Details:
Wood Screw
Product Material:
Steel Zinc

Metallics JFWP49 – Frequently Asked Questions

1) What size Phillips driver do I need for Metallics JFWP49 #14 wood screws?
A #3 Phillips bit. The recess on the JFWP49 runs 0.270 to 0.283 inch in diameter and 0.046 to 0.070 inch deep, so a #2 bit will cam out and chew the recess under load. Keep a #3 in the driver for the whole run.
2) Can I use these zinc plated wood screws outdoors or in a damp location?
Zinc plated steel is the wrong choice for sustained exposure. The JFWP49 is steel with a zinc finish, which handles dry interior work and covered locations, but it will corrode in weather, in treated lumber, or anywhere wet. For exterior or ACQ-treated wood, go to a stainless or a coated exterior-rated wood screw instead.
3) Are these Metallics wood screws threaded the full length?
No. The JFWP49 is a tapered point wood screw with 10 threads per inch, and the thread runs about two thirds of the length, leaving a smooth shank under the head. That unthreaded shank is what lets the top board pull tight against the bottom one, so these work well for clamping two pieces of wood together.
4) How are Metallics JFWP49 screws packaged and what is the minimum order?
They come in a jar, 100 count, and 100 is the order minimum. Jar weight is 1.67 lbs. If you need a different count or a different length in the JFWP flat head Phillips line, those are available by request.
5) Do these screws meet a recognized dimensional standard for spec work?
Yes. The JFWP49 is built to ASME B18.6.1, with threads to ASME B18.6.1-1997, so head, recess and thread dimensions follow the published wood screw standard rather than a house profile. That matters if your submittal calls out a standard fastener dimension.
6) Are Metallics JFWP flat head wood screws acceptable on a federally funded job?
They are flagged Buy American compliant and ARRA compliant, which is what a government or institutional buyer needs for federally funded work. Country of origin is listed as multiple, so if your contract requires a single named origin on the submittal, confirm the specific lot.
7) Should I pre-drill for a #14 wood screw?
In hardwood, yes. A #14 is a heavy gauge screw with a tapered point and coarse 10 threads per inch; driven dry into oak, maple or near a board end it will split the stock. Pilot the shank in the top piece and a smaller pilot in the base. In pine or other softwood away from edges you can usually drive it without a pilot.
How fast can I get the Metallics JFWP49 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFWP49 come with a warranty?
Absolutely. The Metallics JFWP49 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFWP49?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFWP49 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!