Metallics TS66M 14 x 3 in. Pan...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,928.57
Metallics TS66M 14 x 3 in. Pan Head Slotted Sharp Point Tapping Screws - Steel Zinc - 1000qty

Metallics TS66M 14 x 3 in. Pan Head Slotted Sharp Point Tapping Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: TS66M
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,928.57
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
14 x 3 in. Pan Head Slotted Sharp Point Tapping Screws - Steel Zinc - 1000qty

  • Additional Notes

    • Other sizes and quantities available by request | Dimensions for #9 diameter are independent of ASME B18.6.4

  • Features

    • Pan head with slotted Drive
    • Steel Zinc Material
    • 14 Diameter, 3" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
1000 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.3-2013
Division:
Electrical H1
Drive Type:
Slotted
Fastener Head Height:
0.126 - 0.139 in.
Fastener Head Type:
Pan
Fastener Head Width:
0.457 - 0.476 in.
Fastener Length:
3
Hardness:
Rockwell C28 - 38
Language Code:
EN
Material Standard:
AISI 1016 - 1024
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Slot-Phil-Combo_Self_Tap.pdf
Order Minimum Imperial:
1000
Order Minimum Uom Imperial:
TH
Pack Type:
Box
Product Group:
Fasteners
Product Height:
6.13 in
Product Length:
9 in
Product Weight:
31.37 lbs
Product Width:
9 in
Screw Point Type:
Gimlet Point
Slot Depth:
0.068 - 0.085
Slot Width:
0.064 - 0.075
Sub Division:
Electrical-E H2
Thread Per Inch:
10
Thread Standard:
ASME B18.6.4
Torsional Strength:
125 lb-in minimum
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Type A Tapping Screw
Type2:
Type A Tapping Screw
Series:
JTS
Product Finish:
Zinc
Product Details:
Type A Tapping Screw
Product Material:
Steel Zinc

Metallics TS66M – Frequently Asked Questions

1) What material will a #14 x 3 in. Type A tapping screw actually bite into?
The Metallics TS66M is a Type A tapping screw with a gimlet (sharp) point and 10 threads per inch, so it's made for thin sheet metal and soft materials where the screw forms its own thread as it drives. The sharp point lets it start without a pilot hole in sheet metal; in harder or thicker stock you still want a pilot. It is not a self-drilling screw and it is not a machine screw for tapped holes.
2) Does the Metallics TS66M screw come in a box of 1000, or can I buy a few?
It ships boxed with an order minimum of 1000 pieces, so this is a bulk buy for shops and MRO stockrooms rather than a handful for one repair. One box runs 31.37 lbs.
3) Are the Metallics TS66M screws Buy American and ARRA compliant for a government job?
Both are flagged compliant on the TS66M, which matters on federally funded work and public institutional projects. Country of origin is listed as multiple, so if your spec requires a single named country of manufacture, confirm the lot you receive.
4) Will a pan head screw this size sit flat against a strap or clamp hole?
Yes, the pan head bears on the surface rather than sinking in. Head width runs 0.457 to 0.476 in. and head height 0.126 to 0.139 in., so it covers a standard #14 clearance hole without needing a countersink. If you need a flush surface, a flat head is the wrong product to look for here.
5) What standards do these #14 slotted pan head tapping screws meet for a submittal?
Dimensions follow ASME B18.6.3-2013, threads follow ASME B18.6.4, and the steel is AISI 1016 to 1024. Those three plus the 125 lb-in torsional minimum and Rockwell C28-38 hardness are what a spec reviewer normally wants on a tapping screw submittal.
6) Is zinc plated steel good enough for outdoor or damp locations?
The TS66M is steel with a zinc finish, which is a dry-interior coating. Zinc plating handles indoor electrical rooms, panel work, and general interior MRO fine, but in wet, coastal, or chemically exposed locations it will corrode. For those, specify stainless or hot dip galvanized instead.
7) How much thickness will a 3 inch tapping screw hold together?
At 3 inches of overall length with threads running the shank, the TS66M is for deep stack-ups: blocking behind sheet metal, wood furring to a stud, thick trim to a substrate. Count on the point needing somewhere to go past the back of your assembly. For thin sheet-to-sheet work that length is wasted and a shorter #14 is the better call.
How fast can I get the Metallics TS66M delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics TS66M come with a warranty?
Absolutely. The Metallics TS66M is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics TS66M?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics TS66M from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!