Metallics TS66 14 x 3 in. Pan ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$192.86
Metallics TS66 14 x 3 in. Pan Head Slotted Sharp Point Tapping Screws - Steel Zinc - 100qty

Metallics TS66 14 x 3 in. Pan Head Slotted Sharp Point Tapping Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: TS66
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$192.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
14 x 3 in. Pan Head Slotted Sharp Point Tapping Screws - Steel Zinc - 100qty

  • Features

    • Steel Zinc Material
    • Pan head with slotted Drive
    • 14 Diameter, 3" Length

  • Additional Notes

    • Other sizes and quantities available by request | Dimensions for #9 diameter are independent of ASME B18.6.4

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.3-2013
Division:
Electrical H1
Drive Type:
Slotted
Fastener Head Height:
0.126 - 0.139 in.
Fastener Head Type:
Pan
Fastener Head Width:
0.457 - 0.476 in.
Fastener Length:
3
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell C28 - 38
Language Code:
EN
Material Standard:
AISI 1016 - 1024
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Slot-Phil-Combo_Self_Tap.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
7.25 in
Product Length:
4.5 in
Product Weight:
3.08 lbs
Product Width:
4.5 in
Screw Point Type:
Gimlet Point
Slot Depth:
0.068 - 0.085
Slot Width:
0.064 - 0.075
Sub Division:
Electrical-E H2
Thread Per Inch:
10
Thread Standard:
ASME B18.6.4
Torsional Strength:
125 lb-in minimum
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Type A Tapping Screw
Type2:
Type A Tapping Screw
Series:
JTS
Product Finish:
Zinc
Product Details:
Type A Tapping Screw
Product Material:
Steel Zinc

Metallics TS66 – Frequently Asked Questions

1) Is the Metallics TS66 tapping screw sold individually or only by the jar?
The TS66 ships in a jar, with an order minimum of 100 count. So you're buying a 100-piece jar, not loose pieces.
2) Will a #14 x 3 in. Type A tapping screw bite into sheet metal without a pilot hole?
The TS66 is a Type A tapping screw with a gimlet (sharp) point, which is the point style meant to start in thin sheet metal and soft materials without a pre-drilled pilot. Thread count is 10 per inch, the coarse Type A spacing. In heavier gauge steel you still want a pilot hole, since Type A screws form rather than cut their thread.
3) Do these Metallics screws meet Buy American requirements for a government job?
The TS66 is flagged as both Buy American compliant and ARRA compliant in the manufacturer's data. Country of origin is listed as multiple, so if your spec requires a single documented origin, request the cert sheet for the lot you receive.
4) What driver fits the Metallics TS66 screw?
Slotted drive only, no Phillips or combo recess. The slot measures 0.064 to 0.075 in. wide and 0.068 to 0.085 in. deep, so a #3 flat blade sized to that width seats properly. A blade too narrow will cam out of the slot and chew the head.
5) Are these tapping screws suitable for outdoor or damp locations?
The TS66 is carbon steel with a zinc finish. Zinc plating handles indoor and sheltered conditions well, but in direct weather, coastal air, or wet locations it will eventually rust, so for exposed exterior work specify a stainless or hot dip galvanized fastener instead.
6) What standards do Metallics JTS Type A tapping screws conform to?
Dimensions follow ASME B18.6.3-2013 and the thread form follows ASME B18.6.4. Steel is per AISI 1016 to 1024. Note that for #9 diameter screws in this family the dimensions are independent of ASME B18.6.4, which does not affect the #14 x 3 in. TS66.
7) How much does a jar of Metallics TS66 screws weigh for shipping?
A jar of TS66 screws is listed at 3.08 lbs, with jar dimensions of 7.25 x 4.5 x 4.5 in. Useful if you're staging multiple jars on a cart or working to a shipping weight on a materials list.
How fast can I get the Metallics TS66 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics TS66 come with a warranty?
Absolutely. The Metallics TS66 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics TS66?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics TS66 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!