Metallics JDS175V 14 x 3/4 in....
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.33
$0.33
Metallics JDS175V 14 x 3/4 in. 3/8 Indented Hex Head Slotted Sharp Point Tapping Screws - Steel Zinc - 500qty

Metallics JDS175V 14 x 3/4 in. 3/8 Indented Hex Head Slotted Sharp Point Tapping Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JDS175V
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.33
$0.33
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
14 x 3/4 in. 3/8 Indented Hex Head Slotted Sharp Point Tapping Screws - Steel Zinc - 500qty

  • Additional Notes

    • Other sizes and quantities available by request | Dimensions for #9 diameter are independent of ASME B18.6.4

  • Features

    • Steel Zinc Material
    • 14 Diameter, 3/4" Length
    • Hex 3/8 Head with slotted Drive

Manufacturer Resources

Product Specs

Minimum Purchase:
500 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drive Type:
Hex/Slotted
Fastener Head Height:
0.172 - 0.19 in.
Fastener Head Type:
Indented Hex
Fastener Head Width:
0.367 - 0.375 in.
Fastener Length:
4-Mar
Hardness:
RockweII C28-38
Language Code:
EN
Material Standard:
AISI 1016 - 1024
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Indent_Hex_Head_Slot_TS.pdf
Order Minimum Imperial:
500
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
5.75 in
Product Length:
3.5 in
Product Weight:
4.85 lbs
Product Width:
3.5 in
Screw Point Type:
Gimlet Point
Slot Depth:
0.083 - 0.101
Slot Width:
0.064 - 0.075
Sub Division:
Electrical-E H2
Thread Per Inch:
10
Thread Standard:
ASME B18.6.4
Torsional Strength:
125 lb-in minimum
Washer Od:
0.480 - 0.520 in.
Washer Thickness:
0.030 - 0.050 IN
Width Across Corners:
0.409
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Type A Tapping Screw
Type2:
Type A Tapping Screw
Series:
JDS
Product Finish:
Zinc
Product Details:
Type A Tapping Screw
Product Material:
Steel Zinc

Metallics JDS175V – Frequently Asked Questions

1) Will a #14 x 3/4 in. sharp point tapping screw work in sheet metal electrical boxes and duct?
That is exactly what the Metallics JDS175V is for. It's a Type A tapping screw with a gimlet (sharp) point and 10 threads per inch, so it cuts its own thread in thin sheet metal without a tapped hole. At 3/4 inch long it suits thin-gauge work like box, duct, and strap fastening; it is not a machine screw and will not thread into an existing tapped 10-32 or 1/4-20 hole.
2) Do these Metallics tapping screws qualify for Buy American on a federal job?
The JDS175V is flagged Buy American compliant and ARRA compliant in the manufacturer data. Country of origin is listed as multiple, so if your spec requires a single named origin, that is the point to pin down with the submittal.
3) Can I drive the JDS175V with a 3/8 hex driver, or do I need a screwdriver?
Either. The head is an indented hex with a slot, so a 3/8 inch hex driver or nutsetter works for speed, and a flat blade fits the slot for tight spots or final snugging. Head width across flats runs 0.367 to 0.375 in., width across corners is 0.409 in., and the slot is 0.064 to 0.075 in. wide by 0.083 to 0.101 in. deep.
4) How many Metallics JDS175V screws come in a pack?
They ship 500 to a jar, which is the order minimum (500 CT). Pack weight is 4.85 lbs. Other sizes and quantities are available by request.
5) What standards do these indented hex head tapping screws meet?
Dimensions follow ASME B18.6.3-2010 and the thread follows ASME B18.6.4. Material is carbon steel to AISI 1016-1024, case hardness Rockwell C28-38, with a minimum torsional strength of 125 lb-in. Note that dimensions for the #9 diameter in this family fall outside ASME B18.6.4.
6) Will zinc plated screws hold up outdoors or in a damp mechanical room?
Zinc plated steel is the finish here, which handles indoor and protected damp locations. For direct weather exposure, coastal air, or anywhere washdown chemicals hit the fastener, zinc plating will eventually sacrifice and rust, and stainless is the better call.
7) Is a Type A sharp point screw the right choice, or should I use a self-drilling screw?
Type A with a gimlet point needs a pilot hole or a soft, thin substrate it can pierce and tap as it drives. If you are fastening into heavier gauge metal with no pre-drilled hole, a self-drilling (Type TEK) screw is the better choice because it cuts its own hole. For pre-punched knockouts and light sheet, the Type A point threads faster and holds well at 10 TPI.
How fast can I get the Metallics JDS175V delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JDS175V come with a warranty?
Absolutely. The Metallics JDS175V is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JDS175V?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JDS175V from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!