You may also like
15593 Viega ProPress reducer Smart Connect technology Copper, 1-1/4'' x 3/4''
Manufacturer Resources
Product Specs
- Connection Type:
- P1 x P2
- Country Of Origin:
- Made In Germany
- Material Type:
- Copper
- Product Dimension:
- 1-1/4'' x 3/4''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Reducers
- Product Type:
- Reducer
- Product Length:
- 1.76"
- Product Height:
- 1.76"
- Product Weight:
- 0.231 lbs
- Product Width:
- 2.638"
Viega 15593 – Frequently Asked Questions
1) What sizes does the Viega 15593 ProPress copper reducer connect?
The Viega 15593 reduces 1-1/4 inch down to 3/4 inch, press by press on both ends. It's a copper fitting, so it's for copper tube runs, not for PEX or steel.
2) Is the Viega 15593 reducer a press fitting or does it need soldering?
It's a press fitting on both ends, listed as P1 x P2, so it goes on with a press tool and jaws sized for 1-1/4 inch and 3/4 inch copper. No torch, no flux, no solder. You still need to cut square, deburr, and mark insertion depth before pressing.
3) What is Smart Connect and why does it matter on a press reducer?
Smart Connect is Viega's unpressed-connection feature: a fitting left unpressed will leak visibly during pressure testing so the installer can find it before the wall closes up. On a job with dozens of joints, that's the difference between a quick test and chasing a slow leak later. The 15593 carries it.
4) Can I use the Viega 15593 copper reducer on a potable water line?
It's a copper press fitting, which is the standard body material for potable copper water distribution, and it presses onto the same Type L or Type M copper tube the rest of the line is run in. Match the fitting material to the tube you're joining: copper to copper.
5) Should I use a press reducer or a reducing coupling with a bushing?
A single reducer like the 15593 makes the 1-1/4 to 3/4 inch transition in one joint, which means one press instead of two and one fewer leak path. Stacking a coupling and a bushing adds a joint and length to the run. Use the dedicated reducer where the size change is at a fixed point; use separate fittings only when you need the intermediate size tapped off.
6) What is the Viega part number and where is it made?
Part number 15593, manufactured in Germany. That's the number to quote for reorders or to match against a submittal calling out a Viega ProPress 1-1/4 x 3/4 copper reducer.
How fast can I get the Viega 15593 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 15593 come with a warranty?
Absolutely. The Viega 15593 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 15593?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 15593 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.