You may also like
#16--14 Wire Term Spade 6-Stud
Manufacturer Resources
Product Specs
- Department:
- Electrical
- Product Group:
- Wire Connectors & Terminals
- Product Subgroup:
- Lugs & Terminals
- Product Type:
- Fork Terminal
Metallics MWSC16146 – Frequently Asked Questions
1) What wire size does the Metallics MWSC16146 spade terminal accept?
The MWSC16146 spade terminal is sized for #16 to #14 AWG wire. Running it on anything heavier than 14 AWG or lighter than 16 AWG will give you a crimp that either won't close on the conductor or won't seat the barrel.
2) What screw or stud size does this Metallics spade terminal fit?
It's a 6-stud spade, so the fork fits a #6 screw or stud, the size commonly found on terminal blocks, small device terminals and control panel strips. A #8 or #10 stud needs a larger terminal.
3) Spade terminal or ring terminal for a panel landing?
A spade (fork) terminal like the MWSC16146 slides under a loosened #6 screw without removing it, which speeds up panel work and service changes. A ring terminal is captive and won't back out if the screw loosens, so it's the better choice on vibration-prone equipment or where a code or spec calls for a captive connection.
4) Can I use the Metallics MWSC16146 on 12 AWG wire?
No. This terminal is built for the 16 to 14 AWG range only. For 12 AWG you need the next barrel size up, typically a 12-10 AWG spade with the same #6 stud opening.
5) Do I need a special tool to install this Metallics wire terminal?
It's a crimp terminal, so it needs a crimping tool matched to insulated barrels in the 16-14 AWG range. Pliers or a cutter's crimp notch won't produce a reliable gas-tight crimp on the barrel.
How fast can I get the Metallics MWSC16146 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics MWSC16146 come with a warranty?
Absolutely. The Metallics MWSC16146 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics MWSC16146?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics MWSC16146 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.