You may also like
1IN WATERT CONN .26X.5-.385X.6
Manufacturer Resources
Product Specs
- Number Of Batteries:
- 0
- Product Group:
- Wiring Devices
- Product Type:
- Watertight Connectors for Oval Cable
- Department:
- Electrical
- Product Subgroup:
- Cord Grips
- Product Color:
- Metallic
- Product Material:
- Zinc Die Cast
Thomas & Betts 2432 – Frequently Asked Questions
1) What cable size does the Thomas & Betts 2432 watertight connector accept?
The 2432 is built for oval cable, with a cable range of .26 x .5 to .385 x .6 inches. Those are the flat-cable dimensions, so measure the minor and major axis of your jacket before ordering. Round cable of an equivalent area will not seal correctly in an oval-cable gland.
2) What size knockout or hub does the 2432 connector thread into?
It is a 1 inch connector, so it lands in a 1 inch trade-size knockout or hub on a box, enclosure or fitting. The threaded hub is what makes up the watertight joint at the enclosure wall, so the knockout has to be clean and full size, not a reduced or damaged opening.
3) Do I need a watertight connector or will a standard strain relief cord grip do?
Two different jobs. A plain strain relief grip holds the cable and takes the pull off the terminations but does nothing about moisture at the enclosure. The 2432 is a watertight type, so it both grips oval cable and seals the entry, which is what you want on outdoor, washdown or damp-location equipment feeds. Indoors and dry, a non-watertight grip in the same cable range is enough.
4) Can I use the 2432 on SO cord or round SJ cable?
No. This one is sized for oval cable at .26 x .5 to .385 x .6 inches, and the gland closes on that flat profile. Round cord needs a round-cable watertight grip sized to the outside diameter; putting it in an oval fitting leaves gaps and the seal fails.
5) Is the Thomas & Betts 2432 metal or plastic?
Zinc die cast, with a metallic finish. That matters if you need the fitting itself to be part of a metallic path or if the location sees impact or UV, where a nylon cord grip would be the weaker choice.
6) How do I order the Thomas & Betts oval cable watertight connector, and what is the part number?
Order it by Thomas & Betts part number 2432. It is a single configuration, so there is no finish, thread or cable-range option to specify beyond confirming your cable falls inside .26 x .5 to .385 x .6 inches and that the enclosure opening is 1 inch.
How fast can I get the Thomas & Betts 2432 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Thomas & Betts 2432 come with a warranty?
Absolutely. The Thomas & Betts 2432 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Thomas & Betts 2432?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Thomas & Betts 2432 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.