You may also like
1IN WIREMESH GRIP SST 1.065-1.205
Manufacturer Resources
Product Specs
- Number Of Batteries:
- 0
- Product Type:
- Wiremesh Grips
- Department:
- Electrical
- Product Material:
- Stainless Steel
Thomas & Betts WMG-PC13 – Frequently Asked Questions
1) What cable diameter does the Thomas & Betts WMG-PC13 wire mesh grip fit?
The WMG-PC13 is sized for cable in the 1.065 to 1.205 inch outside diameter range. Mesh grips only hold properly when the cable OD falls inside the stated window, so measure the jacket OD before ordering. Cable under 1.065 inches will not let the mesh close down enough to bite, and anything over 1.205 will not thread through.
2) The WMG-PC13 is called a 1 inch grip but the range is 1.065 to 1.205 - which number do I go by?
Go by the 1.065 to 1.205 inch range. The 1 inch label is the nominal trade size, not the cable OD. Actual jacketed cable almost always measures over its nominal size, which is why the fit window starts above 1.000 inch. Caliper the cable and match it to the range.
3) Is the WMG-PC13 wire mesh grip stainless steel or galvanized?
Stainless steel. That is the material an electrician wants where the grip sits outdoors, in a wash-down area, or in a corrosive industrial environment, since a plated carbon steel mesh will rust out at the weave first.
4) Can I use one WMG-PC13 grip for two smaller cables bundled together?
Only if the bundle actually measures between 1.065 and 1.205 inches across and stays round under tension. Mesh grips are specified on measured OD, not conductor count. Loose bundles that compress unevenly will let the mesh slip, so a bundle you cannot hold to a consistent diameter should get individual grips sized to each cable instead.
5) What is a wire mesh grip used for on a cable run?
A wire mesh grip is a woven basket that slips over a cable and tightens on it as tension is applied, so it can support the weight of a vertical or suspended run, take strain off a termination, or serve as a pulling eye. The WMG-PC13 covers cable measuring 1.065 to 1.205 inches OD.
How fast can I get the Thomas & Betts WMG-PC13 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Thomas & Betts WMG-PC13 come with a warranty?
Absolutely. The Thomas & Betts WMG-PC13 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Thomas & Betts WMG-PC13?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Thomas & Betts WMG-PC13 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.