You may also like
1X1/2 BLK MI 90 ELL
Manufacturer Resources
Product Specs
- Dimensions Specification:
- ASME B16.3
- End Conn Size 1:
- FPT
- End Conn Size 2:
- FPT
- Material Specification:
- ASTM A-197
- Pressure Rating Specification:
- ASME B16.3
- Size 1:
- 1
- Size 2:
- 0.5
- Strength:
- STD
- Thread Specification:
- ASME B1.20.1
- Ul Fm:
- Yes
- Department:
- Plumbing
- Product Group:
- Pipe Fittings
- Product Subgroup:
- Elbows
- Product Type:
- 90° Elbow
- Product Finish:
- Black
- Product Material:
- Malleable Iron
- Product Weight:
- 0.46 lbs
ASC Engineered Solutions 310008602 – Frequently Asked Questions
1) What size pipe does the ASC Engineered Solutions 1 x 1/2 black malleable iron 90 degree elbow connect?
It's a reducing elbow: one end takes 1 inch pipe, the other takes 1/2 inch. Both ends are female pipe thread, so it threads onto male-threaded pipe nipples or threaded pipe ends on each side. Use it where you need to turn a corner and step a 1 inch run down to a 1/2 inch branch in one fitting instead of an elbow plus a bushing.
2) Will this black malleable iron elbow thread onto standard NPT pipe?
Yes. The threads are cut to ASME B1.20.1, which is the NPT standard, so it mates with any standard NPT male threaded black pipe or nipple. Thread sealant or PTFE tape is still required on the joint and is not supplied with the fitting.
3) Can I use a black malleable iron 90 elbow on a gas line, or do I need galvanized?
Black malleable iron is the standard choice for natural gas and propane piping and for closed hydronic and steam systems. The black finish is a mill coating, not corrosion protection, so keep it out of wet or buried service and out of potable water; galvanized malleable iron is what goes on water lines and damp locations. This fitting is black, ASTM A-197 malleable iron.
4) Is this a Class 150 standard fitting or an extra heavy 300?
Standard pattern (Class 150 in malleable iron terms), not extra heavy. Its pressure rating follows ASME B16.3, which sets the working pressure by class and size. If your drawing calls out Class 300 extra heavy for the service pressure, this one does not meet that call.
5) Will this reducing elbow match the fittings already on my existing threaded black iron run?
It should. Dimensions follow ASME B16.3, the same standard other threaded malleable iron fittings are built to, so center-to-face dimensions and thread engagement line up with what's already installed on a standard black iron system. Confirm your existing run is threaded rather than grooved or welded.
6) How much does the 1 x 1/2 inch malleable iron 90 elbow weigh?
0.46 lbs each. Worth knowing when you're pricing freight on a bulk fitting order or figuring hanger spacing on a run built from a lot of these.
How fast can I get the ASC Engineered Solutions 310008602 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the ASC Engineered Solutions 310008602 come with a warranty?
Absolutely. The ASC Engineered Solutions 310008602 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the ASC Engineered Solutions 310008602?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the ASC Engineered Solutions 310008602 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.