You may also like
1X1X2 BLK MI TEE
Manufacturer Resources
Product Specs
- Dimensions Specification:
- ASME B16.3
- End Conn Size 1:
- FPT
- End Conn Size 2:
- FPT
- End Conn Size 3:
- FPT
- Material Specification:
- ASTM A-197
- Pressure Rating Specification:
- ASME B16.3
- Size 1:
- 1
- Size 2:
- 1
- Size 3:
- 2
- Strength:
- STD
- Thread Specification:
- ASME B1.20.1
- Ul Fm:
- Yes
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Tees
- Product Type:
- Tee
- Product Finish:
- Black
- Product Material:
- Malleable Iron
- Product Weight:
- 1.63 lbs
ASC Engineered Solutions 310052204 – Frequently Asked Questions
1) What do the 1 x 1 x 2 sizes mean on this ASC black malleable iron tee?
The two run ends are 1 inch and the branch outlet is 2 inch, so it is a bull head tee: the outlet is larger than the run. All three openings are female pipe thread (FPT). If you expected a reducing tee that steps down at the branch, this is the opposite, and you want a 2 x 2 x 1 instead.
2) Will this black malleable iron tee thread onto standard steel pipe?
Yes. All three openings are female NPT cut to ASME B1.20.1, the standard US taper pipe thread, so it makes up with any standard black or galvanized steel pipe nipple of matching size. Use pipe dope or PTFE tape on the male threads.
3) Is this ASC tee UL listed and FM approved for fire sprinkler work?
It carries UL/FM recognition, so it is acceptable where a fire protection spec calls for listed and approved fittings. The fitting is standard (STD) class malleable iron built to the ASME B16.3 pressure ratings.
4) Can I use a black malleable iron tee on a potable water line?
No. Black malleable iron is for gas, fire protection, air, and non-potable service. The black finish is a mill/oil coating with no corrosion protection against water, so it rusts on wet potable lines. For potable water use galvanized malleable iron, brass, or copper fittings instead.
5) What material spec does this ASC pipe tee meet?
The casting is ASTM A-197 malleable iron, with dimensions to ASME B16.3. Those two together are the pair most mechanical and fire protection submittals ask for on a threaded iron fitting, so the fitting drops straight into a spec calling out Class 150 threaded malleable iron.
6) Are the center-to-end dimensions on this tee interchangeable with another brand's malleable tee?
Yes. Because the fitting is made to ASME B16.3, its center-to-end lay lengths match any other B16.3 Class 150 malleable iron 1 x 1 x 2 tee. You can swap it into an existing assembly without re-cutting nipples.
7) How much does the ASC 1 x 1 x 2 black tee weigh?
1.63 lbs each. Worth knowing when you are hanging a run of them off threaded rod or figuring freight on a bulk order of fittings.
How fast can I get the ASC Engineered Solutions 310052204 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the ASC Engineered Solutions 310052204 come with a warranty?
Absolutely. The ASC Engineered Solutions 310052204 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the ASC Engineered Solutions 310052204?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the ASC Engineered Solutions 310052204 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.