You may also like
Atkore Allied Tube & Conduit RCK50KON 1/2" Threadless Rigid Compression Coupling
Model: ATC-RCK50KON
1/2" Threadless Rigid Compression Coupling
Features
Neoprene gasket provides a concrete tight seal
Use where conduit runs are closely spaced
Zinc plated to prevent corrosion
Allied Tube & Conduit
$62.06
$13.27
Atkore Allied Tube & Conduit RCK200KON 2" Threadless Rigid Compression Coupling
Model: ATC-RCK200KON
2" Threadless Rigid Compression Coupling
Features
Use where conduit runs are closely spaced
Neoprene gasket provides a concrete tight seal
Zinc plated to prevent corrosion
Allied Tube & Conduit
$123.96
$82.13
2-1/2" Threadless Rigid Compression Connector
Features
- NPT thread above 2"
- NPSM thread 1/2" thru 2"
- UL Listed as concrete tight
Manufacturer Resources
Product Specs
- Department:
- Electrical
Allied Tube & Conduit RCC250KON – Frequently Asked Questions
1) What size rigid conduit does the Allied Tube & Conduit RCC250KON connector fit?
The RCC250KON is a 2-1/2 inch threadless rigid compression connector, so it is made up to 2-1/2 inch rigid metal conduit. The compression end grips unthreaded conduit, which is what you want when you cut conduit in the field and cannot thread the end.
2) Is the RCC250KON threaded NPT or NPSM on the box end?
At 2-1/2 inch it is NPT. Allied's threadless rigid compression connectors use NPSM threads in the 1/2 inch through 2 inch sizes and NPT threads above 2 inch, so the RCC250KON falls in the NPT group. Worth knowing if you are mating it to a tapered female hub rather than a locknut and box.
3) Can I use a threadless compression connector in a concrete pour?
Yes. The RCC250KON is UL Listed as concrete tight, so it is acceptable where the fitting will be encased in poured concrete, such as a slab penetration or a deck pour. That listing is for concrete tight only, so treat wet or raintight locations as a separate question.
4) Do I need to thread the conduit to use this Allied connector?
No. That is the point of a threadless compression fitting. The RCC250KON accepts a plain cut end of 2-1/2 inch rigid conduit and seals with a compression nut and gland, so you skip threading the field cut. You still need a square, deburred cut for the gland to seat properly.
5) What is the manufacturer part number for the 2-1/2 inch Allied threadless rigid compression connector?
Order it as RCC250KON from Allied Tube & Conduit (Atkore). The 250 in the number is the 2-1/2 inch trade size, so the matching smaller sizes follow the same pattern in the same RCC series.
How fast can I get the Allied Tube & Conduit RCC250KON delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Allied Tube & Conduit RCC250KON come with a warranty?
Absolutely. The Allied Tube & Conduit RCC250KON is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Allied Tube & Conduit RCC250KON?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Allied Tube & Conduit RCC250KON from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.