You may also like
2 AWG SIMPULL HEAD 24" PULLING DEVICE
Features
- Lowest Profile Available
- Staggered lengths
- Saves Time
- Available in sizes 8 AWG - 2 AWG
Manufacturer Resources
Product Specs
- Items In Inner Pack:
- 5
- Batteries Included :
- No
- Batteries Required :
- No
- Commercial Residential:
- Commercial
- Csa Certified:
- No
- Does The Item Contain Mercury :
- No
- Item Extension:
- 12.6
- Item Height:
- 1.6
- Item Weight:
- 0.41
- Item Width:
- 3.9
- Master Pack Height:
- 2.1
- Package Length:
- 29.7
- Packaging Type:
- cardboard
- Product Color:
- Silver
- Product Material:
- Steel
Southwire SPH2-24 – Frequently Asked Questions
1) What wire size does the Southwire SPH2-24 SIMpull head fit?
The SPH2-24 is the 2 AWG version of the SIMpull head. Southwire builds this pulling head family for 8 AWG through 2 AWG conductors, so match the head to the conductor size you are pulling, one head per conductor. For a 6 AWG or 8 AWG pull you need the corresponding size head, not this one.
2) Will a SIMpull head add much diameter inside the conduit?
Not much. The SIMpull head is the lowest profile design Southwire offers, and the part itself measures 1.6 in height, 3.9 in width and 12.6 in extension, with a weight of 0.41 lb. The low profile is the point: it keeps the pulling assembly close to the conductor diameter so it clears couplings and bends instead of hanging up.
3) Do I still need to tape and basket-grip the conductors if I use SIMpull heads?
No. The SIMpull head is a factory pulling attachment that replaces the job-site routine of stripping, looping and taping each conductor to the rope, which is where the time savings come from. Each 2 AWG conductor gets its own SPH2-24 head and the heads tie to the pulling rope.
4) What does the 24 in SPH2-24 refer to?
It is the pulling head length designation, 24 inches. Southwire offers these heads in staggered lengths so that when you pull multiple conductors the heads do not bunch up at the same point in the conduit, which is what lets the bundle round a bend more easily.
5) How many pulling heads come in a pack?
The inner pack holds 5 heads, shipped in cardboard packaging roughly 29.7 long. Five is a practical count for a multi-conductor feeder pull, three phases plus a neutral and a ground.
6) What is the Southwire SIMpull head made of, and is it meant for commercial feeder work?
Steel construction, silver finish, and Southwire classes it as a commercial product. It is a pulling device for conductor installation in conduit, not a residential accessory or a termination lug, so treat it as consumable rigging for the pull rather than part of the finished installation.
7) Is the SPH2-24 pulling head CSA certified?
No, the SPH2-24 is not CSA certified. If your project specification or inspector requires CSA marking on pulling accessories for Canadian work, this head will not satisfy it.
How fast can I get the Southwire SPH2-24 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Southwire SPH2-24 come with a warranty?
Absolutely. The Southwire SPH2-24 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Southwire SPH2-24?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Southwire SPH2-24 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.