You may also like
2 AWG SIMPULL HEAD 18" PULLING DEVICE
Features
- Available in sizes 8 AWG - 2 AWG
- Lowest Profile Available
- Saves Time
- Staggered lengths
Manufacturer Resources
Product Specs
- Items In Inner Pack:
- 5
- Batteries Included :
- No
- Batteries Required :
- No
- Commercial Residential:
- Commercial
- Csa Certified:
- No
- Does The Item Contain Mercury :
- No
- Item Extension:
- 12.6
- Item Height:
- 1.6
- Item Weight:
- 0.41
- Item Width:
- 3.9
- Master Pack Height:
- 2.1
- Package Length:
- 23.6
- Packaging Type:
- cardboard
- Product Color:
- Silver
- Product Material:
- Steel
Southwire SPH2-18 – Frequently Asked Questions
1) What wire size does the Southwire SPH2-18 SIMpull head fit?
The SPH2-18 is the 2 AWG version of Southwire's SIMpull pulling head. The SIMpull head line covers 8 AWG through 2 AWG, so for smaller conductors you order the head matching that gauge rather than forcing a 2 AWG head onto 8 or 6 AWG wire.
2) Will the Southwire SPH2-18 pulling head fit through a conduit bend without hanging up?
The head measures 12.6 inches of extension, 3.9 inches across and 1.6 inches high, and Southwire builds it as the lowest profile head available. That low height is the point: a bulky head is what catches at an LB or a 90, and at 1.6 inches the SPH2-18 clears far more readily than a taped and basket-gripped makeup.
3) What does the 18 inch in the Southwire SPH2-18 part number refer to?
It is the staggered pull length of the head assembly. Southwire makes the SIMpull heads in staggered lengths so that when you pull several conductors at once the heads do not bunch up at the same point in the raceway, which keeps the bundle profile down going through bends and into boxes.
4) How many SIMpull heads come in a pack of the SPH2-18?
Five to an inner pack. If you are pulling a three-phase feeder plus neutral and ground, one inner pack covers the run with a spare.
5) Why use a SIMpull head instead of taping the conductors to the pull rope?
A taped head is built on site, takes time, and ends up thicker than the conductor bundle itself. The SPH2-18 is a prefabricated steel head for 2 AWG that attaches to the rope directly, saving the makeup time and keeping the profile low at the leading edge of the pull. For other gauges in the same run, use the matching head from the 8 AWG through 2 AWG range so the lengths stagger.
6) Is the Southwire SPH2-18 pulling head meant for commercial work or residential?
Southwire classes the SPH2-18 as a commercial product. That fits where 2 AWG feeders actually get pulled, commercial and multi-family service and subpanel runs, rather than residential branch circuit work.
7) How is the SPH2-18 shipped, and how long a box do I need room for?
It ships in cardboard, with a package length of 23.6 inches. Each head weighs 0.41 pounds, so a five-pack is light enough to carry up a ladder or keep in the van with the fish tape.
How fast can I get the Southwire SPH2-18 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Southwire SPH2-18 come with a warranty?
Absolutely. The Southwire SPH2-18 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Southwire SPH2-18?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Southwire SPH2-18 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.