Klein Tools 662-7-INS #2 Insul...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$82.44
$25.75
Klein Tools 662-7-INS #2 Insulated Screwdriver with 7-Inch Shank

Klein Tools 662-7-INS #2 Insulated Screwdriver with 7-Inch Shank

(No reviews yet) Write a Review

Model: 662-7-INS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$82.44
$25.75
Adding to cart… The item has been added
Free Shipping on orders over $199.99
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
#2 Insulated Screwdriver with 7-Inch Shank

  • Warnings

    • Wear approved eye protection.
    • Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.
    • Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.
    • Only use tools that are marked with the official international 1000-volt rating symbol shown above, if there is any chance that the tools will make contact with an energized source.
    • Because moisture, films, or other surface contaminants are conductive, Klein insulated tools must be kept clean, dry, and free of any surface contaminants.
    • Do NOT use to pry or chisel.
    • Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.

  • Features

    • Custom US-made steel tool
    • Made in the USA
    • Cushion-Grip™ handle for greater torque and comfort
    • Flame Retardant and Impact Resistant Handle
    • 1000V Rated for safety
    • Durable two-layer, molded insulation to meet or exceed all ASTM and IEC standards for insulated tools


662-7-INS - spec sheet

Manufacturer Resources

Spec Sheet

Product Specs

Color Code:
Red
Handle Color:
Black
Handle Material:
High-Dielectric Plastic
Insulated:
Yes
Item Depth:
11.3130 in
Item Height:
1.0000 in
Item Weight:
0.2000 lbs
Item Width:
1.0000 in
Magnetic:
No
Overall Length:
11.313" (28.7 cm)
Shank Length:
7" (17.8 cm)
Shank Type:
Round
Standards:
IEC 60900 and ASTM F1505
Tip Size:
#2
Tip Type:
Square
Department:
Tools
Product Group:
Hand Tools
Product Subgroup:
Screwdrivers & Drivers
Product Type:
Screwdriver
Product Details:
Recessed
Product Material:
Induction Hardened Steel
Product Weight:
3.2 oz (91 g)
Product Width:
1 in
Product Depth:
11.313 in
Product Height:
1 in
Country Of Origin:
United States

Klein Tools 662-7-INS – Frequently Asked Questions

1) Is the Klein 662-7-INS screwdriver a Phillips or a square-recess tip?
It's a square (Robertson) recess tip in a #2 size, not Phillips. If you're driving #2 Phillips screws in a panel, this is the wrong driver.
2) Is the Klein 662-7-INS rated for live electrical work at 1000 volts?
Yes. The 662-7-INS carries a 1000V rating with two-layer molded insulation built to IEC 60900 and ASTM F1505. Klein's own guidance is to de-energize whenever possible: the insulation reduces injury risk if the tool contacts an energized source, it is not a license to work hot. Inspect it before every use and destroy the tool if the insulation is nicked, cut, or melted. Keep it clean and dry, since moisture and surface films conduct.
3) Will a 7-inch shank insulated screwdriver reach screws recessed in a deep panel or enclosure?
The shank measures 7 inches (17.8 cm) with an overall length of 11.313 inches (28.7 cm), so you get real reach into deep gutters, panel backboxes, and behind breaker rows without choking up on the handle. The shank is round, so it clears tight terminal openings better than a square-shank driver.
4) Can I use this insulated screwdriver to pry open a panel cover or scrape a knockout?
No. Klein specifically says not to pry or chisel with it. Prying stresses the shank-to-handle joint and can crack the insulation, which retires the tool. Use a pry bar or a non-insulated driver for that work and keep this one for its rated job.
5) Is the Klein 662-7-INS magnetic?
No, the tip is not magnetized. For fishing dropped screws out of a live panel that's actually an advantage, but if you want screws to stay on the tip one-handed, you'll want a separate magnetizer rather than relying on this driver.
6) What is the handle on the Klein 662-7-INS made of, and will it hold up in a hot or dirty mechanical room?
Black Cushion-Grip handle in high-dielectric plastic, flame retardant and impact resistant. The grip diameter work surface gives you more torque on stubborn #2 square screws, and the material is what makes the 1000V rating possible, so it has to be kept clean and free of oil and moisture to perform as rated.
7) What is the shank material on Klein's insulated square-recess driver?
Induction hardened steel, US-made. That heat treatment is what keeps a #2 square tip from rounding off under the torque the cushion handle lets you apply.
8) How much does the Klein 662-7-INS weigh for a tool pouch or a kit build?
3.2 oz (91 g). Light enough to carry two or three sizes of insulated driver on the belt without noticing the difference, which matters if you're standardizing a service van or an MRO tool crib.
How fast can I get the Klein Tools 662-7-INS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Klein Tools 662-7-INS come with a warranty?
Absolutely. The Klein Tools 662-7-INS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Klein Tools 662-7-INS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Klein Tools 662-7-INS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!