Klein Tools 601-4-INS Insulate...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$80.81
$24.57
Klein Tools 601-4-INS Insulated Screwdriver, 3/16-Inch Cabinet, 4-Inch

Klein Tools 601-4-INS Insulated Screwdriver, 3/16-Inch Cabinet, 4-Inch

(No reviews yet) Write a Review

Model: 601-4-INS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$80.81
$24.57
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Insulated Screwdriver, 3/16-Inch Cabinet, 4-Inch

  • Features

    • Made in the USA
    • Custom US-made tool steel
    • Flame Retardant and Impact Resistant Handle
    • Durable, flame-retardant, molded dual-layer insulation
    • 1000V Rated for safety

  • Warnings

    • Do NOT use to pry or chisel.
    • Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
    • Because moisture, films and other surface contaminants are conductive, Klein insulated tools must be kept clean, dry and free of any surface contamination.
    • Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.
    • Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.
    • Only use tools that are marked with the official international 1000-volt rating symbol shown above, if there is any chance that the tools will make contact with an energized source.
    • Wear approved eye protection.


601-4-INS - spec sheet

Manufacturer Resources

Spec Sheet

Product Specs

Handle Material:
High-Dielectric Plastic
Insulated:
Yes
Magnetic:
No
Overall Length:
7.75" (19.7 cm)
Shank Length:
4" (10.2 cm)
Shank Type:
Round
Standards:
IEC 60900 and ASTM F1505
Tip Size:
3/16" (4.8 mm)
Tip Type:
Cabinet
Department:
Electrical
Product Group:
Hand Tools
Product Subgroup:
Screwdrivers & Drivers
Product Height:
1.1000 in
Product Material:
Induction Hardened Steel
Product Weight:
0.1300 lbs
Product Width:
2.6000 in
Product Depth:
7.7500 in
Product Type:
Screwdriver
Country Of Origin:
United States

Klein Tools 601-4-INS – Frequently Asked Questions

1) Is the Klein 601-4-INS screwdriver rated for live electrical work?
The 601-4-INS is a 1000V rated insulated screwdriver, built to IEC 60900 and ASTM F1505. The insulation is a molded dual-layer, flame-retardant system over the shank. Klein is explicit that it only reduces the chance of injury where the tool contacts an energized source: de-energize whenever possible, keep the tool clean and dry (moisture and surface films conduct), inspect before every use, and destroy the tool if the insulation is damaged in any way.
2) What does a 3/16-inch cabinet tip screwdriver do that a standard flat blade won't?
A cabinet tip is a flat tip with parallel sides rather than a flared blade, so it goes down into a recessed or counterbored screw hole without the blade shoulder catching on the sides. That is why it suits terminal screws set back in panel boards, switch and receptacle terminals, and control enclosures. The 601-4-INS carries a 3/16 inch (4.8 mm) cabinet tip.
3) Can I use the 601-4-INS for prying open a panel cover or scraping?
No. Klein warns specifically against prying or chiseling with it. Doing so risks splitting or lifting the insulation, and once the insulation is compromised the tool is no longer safe for energized work and must be destroyed, not set aside.
4) Is the shank on the Klein 601-4-INS magnetic?
No, the tip is not magnetized. The shank is round induction hardened steel. If you need a screw to hang on the tip while you start it one-handed in a box, this is not the driver for that, and a magnetic insulated driver is the better pick.
5) What is the handle made of on the Klein insulated screwdrivers?
High-dielectric plastic, molded in a dual-layer flame-retardant and impact-resistant construction. The two layers matter on the job: the outer layer is a contrasting color, so a nick that exposes the inner layer is a visible warning that the tool should be taken out of service.
How fast can I get the Klein Tools 601-4-INS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Klein Tools 601-4-INS come with a warranty?
Absolutely. The Klein Tools 601-4-INS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Klein Tools 601-4-INS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Klein Tools 601-4-INS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!