You may also like
20732 Viega ProPress tee Smart Connect technology Copper, 3'' x 2'' x 2''
Manufacturer Resources
Product Specs
- Connection Type:
- P1 x P2 x P3
- Material Type:
- Copper
- Product Dimension:
- 3'' x 2'' x 2''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Tees
- Product Type:
- Tee
- Product Length:
- 3.681"
- Product Height:
- 5.453"
- Product Weight:
- 2.33 lbs
- Product Width:
- 7.441"
- Product Material:
- Copper
Viega 20732 – Frequently Asked Questions
1) What size runs and branch does the Viega ProPress 20732 copper tee take?
The Viega 20732 is a reducing press tee sized 3 inch by 2 inch by 2 inch, so the run is 3 inch copper and the branch drops to 2 inch. It is a press-by-press-by-press fitting, listed as P1 x P2 x P3, meaning all three ends are ProPress sockets with no threading or soldering involved.
2) Is the Viega 20732 tee copper or bronze, and what pipe does it press onto?
It is a copper-body ProPress fitting, so it is intended for copper tube: 3 inch on the run and 2 inch on both branch outlets. Copper press fittings are used on copper water lines; if your system is steel or PEX, this is not the fitting for that connection.
3) How much room do I need to fit a Viega 3 x 2 x 2 press tee in a joist bay or chase?
Plan for the fitting envelope, not just the pipe. The 20732 measures 7.441 inches, 5.453 inches and 3.681 inches across its width, height and length, and you need clearance beyond that for the press jaw or ring to swing around each socket. On a 3 inch run in a tight ceiling, check the jaw swing before you cut the pipe.
4) What does Smart Connect on this Viega press tee actually do for the installer?
Smart Connect is Viega's unpressed-connection feature: an unpressed joint leaks visibly during pressure test so it gets found before the wall closes. On a 3 x 2 x 2 tee that matters, because you have three separate presses on one fitting and a missed one is easy to make. Pressure test before covering the work.
5) Can I use the Viega 20732 to take two 2 inch branches off a 3 inch line?
No. It is a single-branch tee: a 3 inch inlet, a 3 inch... it takes 3 inch on the run and 2 inch on the remaining two openings, which on a 3 x 2 x 2 reducing tee means the run itself reduces. For two separate 2 inch takeoffs from a full 3 inch main you need two 3 x 3 x 2 tees instead.
6) Where is the Viega 20732 press tee manufactured, and what part number do I order it by?
Made in Germany, ordered as Viega part number 20732. That is the number to give a wholesaler or put on a submittal; the 3 x 2 x 2 copper press tee is a single configuration with no finish or option choices to specify.
How fast can I get the Viega 20732 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 20732 come with a warranty?
Absolutely. The Viega 20732 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 20732?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 20732 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.