You may also like
25075 Viega MegaPress extended coupling No stop Smart Connect technology Carbon steel, 3/4'' x 3/4''
Manufacturer Resources
Product Specs
- Connection Type:
- P1 x P2
- Material Type:
- Carbon Steel
- Product Dimension:
- 3/4'' x 3/4''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Couplings
- Product Type:
- Slip Coupling
- Product Length:
- 3.996"
- Product Height:
- 1.496"
- Product Weight:
- 0.443 lbs
- Product Width:
- 1.496"
- Product Material:
- Carbon steel
Viega 25075 – Frequently Asked Questions
1) What is the Viega MegaPress 25075 extended coupling used for?
The Viega 25075 is a 3/4 inch by 3/4 inch extended coupling in carbon steel, with press connections on both ends (P1 x P2). It joins two runs of 3/4 inch carbon steel pipe with a cold press connection instead of welding or threading. Overall length is 3.996 inches, which gives you extra reach compared with a standard coupling when you are closing a gap in an existing run.
2) Does the 25075 MegaPress coupling have a tube stop?
No. The 25075 is a no-stop coupling, so the pipe can slide all the way through the fitting. That is what makes it a repair coupling: you can slip it over one pipe end, bring the second pipe into position, then slide it back to center and press both ends. A stop-type coupling will not do that on a fixed run.
3) Will the Viega 25075 work on copper or PEX?
No. It is a carbon steel MegaPress fitting, sized for 3/4 inch carbon steel pipe. For copper tube you need a ProPress copper fitting, and PEX takes a PureFlow fitting. Pressing a carbon steel coupling onto copper is not a valid connection.
4) What is Smart Connect on this Viega press coupling?
Smart Connect is Viega's feature that lets an unpressed connection leak visibly during pressure testing, so a missed joint shows up before the system is put in service. The 25075 coupling carries it on both press ends.
5) How much clearance do I need around a 3/4 inch MegaPress coupling to get the press jaw on it?
The fitting body measures 1.496 inches in both height and width, so plan clearance around that profile plus room for the jaw itself. Length along the pipe is 3.996 inches. Weight is 0.443 lbs, so support is not a concern on a short run.
6) Do I need to order anything else to install the Viega 25075?
The coupling ships with its sealing elements in place, but you supply the press tool and the 3/4 inch MegaPress jaw or ring, plus a proper pipe cutter and deburring tool. There is no thread and no solder on this fitting, so no dope, tape or flux is involved.
How fast can I get the Viega 25075 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 25075 come with a warranty?
Absolutely. The Viega 25075 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 25075?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 25075 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.