You may also like
25096 Viega MegaPressG extended coupling No stop Smart Connect technology Carbon steel, 2'' x 2''
Manufacturer Resources
Product Specs
- Connection Type:
- P1 x P2
- Material Type:
- Carbon Steel
- Product Dimension:
- 2'' x 2''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Couplings
- Product Type:
- Tee
- Product Length:
- 5.634"
- Product Height:
- 2.894"
- Product Weight:
- 1.693 lbs
- Product Width:
- 2.894"
- Product Material:
- Carbon steel
Viega 25096 – Frequently Asked Questions
1) What size pipe does the Viega MegaPressG 25096 extended coupling fit?
The 25096 MegaPressG extended coupling is a 2 inch by 2 inch fitting, so it joins two runs of 2 inch carbon steel pipe. Both ends are press connections (P1 x P2), not threaded.
2) What does the no stop on the Viega 25096 coupling mean for a repair?
No stop means there is no internal shoulder inside the coupling, so the fitting can slide fully onto one pipe end and then be slid back to center across a joint. That is what lets you repair a cut section of 2 inch pipe in place without springing the line apart. A coupling with a stop would have to be fed over a pipe end you could move. Overall length of the 25096 is 5.634 inches, which is the span you need clear to work in.
3) Can I use the Viega 25096 MegaPressG coupling on copper or stainless tubing?
No. The 25096 is a carbon steel MegaPressG fitting, sized and sealed for 2 inch carbon steel pipe. For copper tube you need a copper press system fitting instead, and for stainless you need a stainless press fitting. Mixing a carbon steel press body onto copper is the wrong material pairing.
4) Is the MegaPressG 25096 the same as a standard MegaPress fitting?
MegaPressG is Viega's gas-rated carbon steel press line, distinct from the standard MegaPress line used on other services. The 25096 is a 2 inch MegaPressG extended coupling with Smart Connect technology, which is Viega's feature that makes an unpressed connection show itself during pressure testing so it does not get left behind in a wall.
5) Do I need anything else to install the Viega 25096 coupling?
The coupling itself is the complete fitting, both ends pressed. You supply the press tool and the 2 inch jaw or ring sized for MegaPress carbon steel, plus a deburred and properly marked pipe end on each side. No thread sealant, no solder, no dope.
6) How much does the 2 inch Viega MegaPressG extended coupling weigh and how much room does it need?
It weighs 1.693 lbs and measures 5.634 inches long by 2.894 inches in the other two dimensions. Plan clearance around the pipe for the press jaw as well, since the tool body needs more room than the fitting itself.
7) Where is the Viega 25096 MegaPressG coupling manufactured?
Made in Germany. For spec submittals that call out country of origin on piping components, that is the value to list against Viega part 25096.
How fast can I get the Viega 25096 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 25096 come with a warranty?
Absolutely. The Viega 25096 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 25096?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 25096 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.