You may also like
25201 Viega MegaPressG 90° elbow Smart Connect technology Carbon steel, 1/2'' x 1/2''
Manufacturer Resources
Product Specs
- Connection Type:
- P1 x P2
- Country Of Origin:
- Made in USA
- Material Type:
- Carbon Steel
- Product Dimension:
- 1/2'' x 1/2''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Elbows
- Product Type:
- Elbow
- Product Length:
- 2.882"
- Product Height:
- 1.264"
- Product Weight:
- 0.37 lbs
- Product Width:
- 2.882"
Viega 25201 – Frequently Asked Questions
1) Can I use a MegaPressG carbon steel elbow on copper or stainless pipe?
No. The 25201 elbow is carbon steel and sized for 1/2 inch carbon steel pipe. Copper tube takes a copper press system, and stainless runs need a stainless fitting. Mixing a carbon steel press fitting onto another pipe material gives you both a dimensional mismatch at the press and a galvanic problem down the road.
2) What does the Smart Connect feature on this Viega elbow actually do for me in the field?
Smart Connect is Viega's unpressed-connection indicator. On a pressure test, a joint that was missed leaks visibly at the sealing element so you find it before the walls close up, rather than discovering it later. On a 1/2 inch elbow buried in a tight fitting cluster that is the difference between a five minute fix and opening drywall.
3) How much clearance do I need to install a 1/2 inch MegaPressG 90 elbow?
The fitting itself measures 2.882 inches in length and width with a height of 1.264 inches, so allow for that body plus room to get the press jaw fully around the collar and swing it. Plan your hanger spacing and stud bay layout around jaw clearance, not just the fitting body, since the tool needs more room than the elbow does.
4) Is the Viega 25201 elbow made in the USA?
Yes, the 25201 MegaPressG elbow is made in the USA. That matters if you are bidding public work, a federal facility, or any job carrying a domestic-content requirement in the specification, since the country of origin has to be documented on submittal.
5) When should I use a press elbow like this instead of threading or welding the joint?
A press elbow gets you a cold, flameless connection, which is why it wins on occupied buildings, mechanical rooms where a hot work permit is a headache, and retrofit work in finished space. Threading a 1/2 inch carbon steel elbow means cutting threads and cleaning cutting oil; welding means a permit and a fire watch. The tradeoff is you need the matching press tool and jaw for a 1/2 inch MegaPress connection, so it only pays off if you own or rent the tool.
How fast can I get the Viega 25201 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 25201 come with a warranty?
Absolutely. The Viega 25201 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 25201?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 25201 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.