You may also like
25506 Viega MegaPressG tee Smart Connect technology Carbon steel, 1-1/4'' x 1-1/4'' x 3/4''
Manufacturer Resources
Product Specs
- Connection Type:
- P1 x P2 x FPT
- Material Type:
- Carbon Steel
- Product Dimension:
- 1-1/4'' x 1-1/4'' x 3/4''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Tees
- Product Type:
- Tee
- Product Length:
- 6.457"
- Product Height:
- 2.205"
- Product Weight:
- 1.349 lbs
- Product Width:
- 2.992"
- Product Material:
- Carbon steel
Viega 25506 – Frequently Asked Questions
1) What are the three outlets on the Viega 25506 MegaPressG tee, and is one of them threaded?
The 25506 is a reducing tee sized 1-1/4 inch x 1-1/4 inch x 3/4 inch, with connections configured P1 x P2 x FPT. That means the two 1-1/4 inch run ends are press connections and the 3/4 inch branch is female pipe thread, so the branch takes a male-threaded nipple, valve, or gauge rather than a pressed fitting.
2) Will the 25506 MegaPressG tee press onto 1-1/4 inch black iron gas pipe?
The two press ends of the 25506 are sized for 1-1/4 inch pipe and the body is carbon steel, so it goes on a 1-1/4 inch carbon steel/black iron run. The 3/4 inch branch is female threaded, not press, so a 3/4 inch press takeoff would need a different fitting.
3) Is the Viega MegaPressG 25506 tee made of carbon steel or stainless?
Carbon steel. The 25506 MegaPressG tee is a carbon steel body, which is what matches it to black iron or carbon steel pipe runs. It is made in Germany.
4) What does Smart Connect mean on this Viega MegaPressG tee?
Smart Connect is the feature Viega builds into the MegaPressG sealing element so an unpressed connection leaks deliberately during pressure testing. That lets you find a missed joint on the 25506's two 1-1/4 inch press ends before the system is put into service. The 3/4 inch threaded branch is sealed by your thread compound or tape instead, so it is not covered by that check.
5) Should I use a press tee with a threaded branch or an all-press tee?
Pick the 25506 when the branch is terminating into something threaded, a gas valve, a drip leg, a regulator, or a gauge, because its 3/4 inch outlet is female pipe thread and takes that device directly without an extra adapter. If the 3/4 inch branch continues as pipe, an all-press reducing tee is the cleaner choice, since every joint then gets the Smart Connect unpressed-joint check instead of relying on a threaded seal.
How fast can I get the Viega 25506 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 25506 come with a warranty?
Absolutely. The Viega 25506 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 25506?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 25506 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.