You may also like
25675 Viega MegaPress union Smart Connect technology Carbon steel, 2'' x 2''
Manufacturer Resources
Product Specs
- Connection Type:
- P x FPT
- Country Of Origin:
- Made in Germany
- Material Type:
- Carbon Steel
- Product Dimension:
- 2'' x 2''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Tees
- Product Type:
- Tee
- Product Length:
- 5"
- Product Height:
- 3.346"
- Product Weight:
- 3.324 lbs
- Product Width:
- 3.701"
Viega 25675 – Frequently Asked Questions
1) What kind of connection does the Viega MegaPress 25675 have on each end?
The 25675 is a 2 inch press by 2 inch female pipe thread fitting (P x FPT). The press end goes onto 2 inch carbon steel pipe with a MegaPress jaw, and the threaded end takes standard 2 inch male NPT. That makes it the transition point where a pressed carbon steel run picks up threaded equipment, a valve, or an existing threaded stub.
2) Can I use the Viega 25675 MegaPress fitting on copper or PEX?
No. The 25675 is carbon steel and is made for carbon steel pipe systems. Copper runs need a copper press fitting and PEX needs a PEX system fitting; a carbon steel MegaPress body is not a substitute for either.
3) Is the Viega 25675 a tee or a union?
Despite being grouped with tees, the 25675 is a two-end fitting: one 2 inch press connection and one 2 inch female threaded connection. It joins two pipe ends in line, it does not branch a third line. If you need a branch, order a MegaPress tee instead.
4) How much room do I need to fit the 2 inch MegaPress 25675 in a tight mechanical space?
The fitting body itself measures 5 inches long, 3.701 inches wide and 3.346 inches high, and weighs 3.324 lbs. Lay out for the press tool jaw clearance around the press end on top of that, since the jaw has to close fully around the fitting to complete the connection.
5) What is Smart Connect on the Viega MegaPress 25675 and does it change how I install it?
Smart Connect is Viega's feature that lets an unpressed connection leak during pressure testing so you can find any joint that got missed. It does not change the install sequence: cut, deburr, mark insertion depth, seat the pipe, press. It is a verification aid, so still pressure test the system before closing walls.
6) Do I need a special tool for the 2 inch MegaPress 25675, or can it be assembled by hand?
The press end requires a press tool with the correct MegaPress jaw or ring for 2 inch carbon steel. There is no hand-tightening or soldering on that side. The FPT side is conventional and gets made up with thread sealant and a wrench.
7) Will the carbon steel MegaPress 25675 hold up in a wet or corrosive location?
The body is carbon steel, which is the standard material for black iron style pipe systems such as compressed air, hydronic heating, fire protection and gas piping. Carbon steel is not the choice for open, chronically wet or corrosive service, where stainless or copper systems are used instead.
How fast can I get the Viega 25675 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 25675 come with a warranty?
Absolutely. The Viega 25675 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 25675?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 25675 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.