You may also like
25725 Viega MegaPress union Smart Connect technology Carbon steel, 2'' x 2''
Manufacturer Resources
Product Specs
- Connection Type:
- P1 x P2
- Country Of Origin:
- Made in Germany
- Material Type:
- Carbon Steel
- Product Dimension:
- 2'' x 2''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Tees
- Product Type:
- Tee
- Product Length:
- 7.598"
- Product Height:
- 3.701"
- Product Weight:
- 4.188 lbs
- Product Width:
- 3.701"
Viega 25725 – Frequently Asked Questions
1) What size pipe does the Viega MegaPress 25725 union connect?
The Viega 25725 MegaPress union joins 2 inch to 2 inch, press on both ends (listed as a P1 x P2 connection). Both sides are press, so there is no threading or welding at either end.
2) Can I use a MegaPress carbon steel union on black iron pipe instead of welding or threading?
That is what it is for. The 25725 is a carbon steel press fitting, so it joins 2 inch carbon steel (black iron) pipe cold, with a press tool and jaw rather than a torch or a pipe threader. Because the body material matches the pipe, it stays in the same metallurgy as the rest of a black iron run.
3) How much space do I need to fit a 2 inch MegaPress union in a tight mechanical room?
Plan on roughly 7.598 inches of length along the pipe and a 3.701 inch envelope in height and width for the fitting body itself. You also need clearance beyond that for the press tool jaw to wrap the collar, so measure to the joint, not just to the fitting.
4) What is Smart Connect on a Viega MegaPress fitting and why does it matter on a punch list?
Smart Connect is Viega's unpressed-joint feature: an unpressed connection leaks visibly during pressure test so the installer finds it before the system is closed up. On a big carbon steel run with dozens of joints, that is how you catch the one fitting that got missed instead of finding it after the ceiling is up.
5) Why specify a union here instead of just pressing two fittings together?
A union gives you a disconnect point. Press joints are permanent, so if you need to pull a pump, valve, or section of 2 inch carbon steel line for service later, the 25725 union is where the pipe comes apart and goes back together without cutting. Put it at the equipment, not mid-run.
6) How heavy is the Viega 25725 and does it need support at the joint?
It weighs 4.188 lbs, which is light enough to hold in place by hand while pressing but heavy enough on 2 inch pipe that you want the run hung on both sides of the union rather than letting the fitting carry the load.
7) Where is the Viega MegaPress 25725 made?
Made in Germany. For submittal packages that require country of origin on mechanical fittings, that is the value to enter for the 25725.
How fast can I get the Viega 25725 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 25725 come with a warranty?
Absolutely. The Viega 25725 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 25725?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 25725 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.