You may also like
25930 Viega MegaPress reducer Smart Connect technology Carbon steel, 3/4'' x 1/2''
Manufacturer Resources
Product Specs
- Connection Type:
- P1 x P2
- Material Type:
- Carbon Steel
- Product Dimension:
- 3/4'' x 1/2''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Reducers
- Product Type:
- Tee
- Product Length:
- 3.425"
- Product Height:
- 1.496"
- Product Weight:
- 0.362 lbs
- Product Width:
- 1.496"
- Product Material:
- Carbon steel
Viega 25930 – Frequently Asked Questions
1) What pipe sizes does the Viega MegaPress 25930 reducing tee connect?
The Viega 25930 is a reducing press tee sized 3/4 inch by 1/2 inch, so it lets you branch or step down between 3/4 inch and 1/2 inch carbon steel pipe without threading or welding. Both ends are press connections (P1 x P2).
2) Can I use a MegaPress carbon steel fitting on copper or PEX?
No. The 25930 tee is carbon steel and is made for black iron and carbon steel pipe systems. For copper tube you need a copper press fitting, and PEX needs its own press system entirely. Putting a carbon steel press fitting on copper is a dissimilar metal problem, not just a sizing one.
3) Do I still need to use pipe dope or thread the pipe for the Viega 25930?
No thread prep at all. The 25930 is a press fitting with Smart Connect technology, so the pipe is cut, deburred, marked for insertion depth and pressed with a MegaPress jaw. No dope, no tape, no cutting oil, no hot work permit.
4) How much clearance do I need to fit a 3/4 x 1/2 MegaPress tee between joists or in a tight chase?
The fitting body itself measures 3.425 inches long by 1.496 inches wide and 1.496 inches high. Plan clearance around that for the press jaw, which needs room to open and close square to the fitting on each connection.
5) What does Smart Connect do on a Viega MegaPress fitting?
Smart Connect is the feature that makes an unpressed connection leak intentionally during testing, so a joint you missed shows itself at pressure test rather than after the walls are closed. On a multi-outlet part like this 3/4 x 1/2 tee that matters, because there are three joints to press and one is easy to skip.
6) What part number should I order for a 3/4 x 1/2 MegaPress carbon steel tee?
Order Viega model 25930. That is the manufacturer part number for the 3/4 inch by 1/2 inch carbon steel MegaPress reducing tee, and it is a single configuration, so there are no finish or option codes to add.
7) Is the Viega 25930 tee made in the USA?
It is made in Germany. For submittals that require country of origin on the fitting schedule, list this one as German manufacture.
How fast can I get the Viega 25930 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 25930 come with a warranty?
Absolutely. The Viega 25930 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 25930?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 25930 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.