You may also like
2X2X1 BLK MI TEE
Manufacturer Resources
Product Specs
- Dimensions Specification:
- ASME B16.3
- End Conn Size 1:
- FPT
- End Conn Size 2:
- FPT
- End Conn Size 3:
- FPT
- Material Specification:
- ASTM A-197
- Pressure Rating Specification:
- ASME B16.3
- Size 1:
- 2
- Size 2:
- 2
- Size 3:
- 1
- Strength:
- STD
- Thread Specification:
- ASME B1.20.1
- Ul Fm:
- Yes
- Department:
- Plumbing
- Product Group:
- Pipe Fittings
- Product Subgroup:
- Tees
- Product Type:
- Tee
- Product Finish:
- Black
- Product Material:
- Malleable Iron
- Product Weight:
- 1.76 lbs
ASC Engineered Solutions 310049200 – Frequently Asked Questions
1) What size pipe does the ASC 2 x 2 x 1 black malleable iron tee accept on each opening?
Run openings are both 2 inch and the branch is 1 inch, so it's a reducing tee. All three ends are female pipe thread (FPT), threaded to ASME B1.20.1 NPT, so it screws onto 2 inch threaded pipe on the run and 1 inch on the branch with no adapters needed.
2) Is this black malleable iron tee approved for fire sprinkler piping?
It carries UL/FM approval, which is what an AHJ looks for on fire protection piping. It's standard (STD) pattern malleable iron built to ASME B16.3 for both dimensions and pressure rating, the usual spec called out on threaded sprinkler mains and branch lines.
3) Can I use a black malleable iron tee on a domestic water line?
No. Black malleable iron is for non-potable service, typically gas, fire protection, and dry or closed-loop systems. The black finish is an unfinished/oiled iron surface with no corrosion protection, so it rusts in wet potable service. For water lines, use a galvanized fitting or a different material.
4) What material spec does this ASC tee meet, and does that matter for inspection?
The casting is made to ASTM A-197, the standard for cupola malleable iron fittings, with dimensions and pressure class to ASME B16.3. Those two callouts plus ASME B1.20.1 threads are what a mechanical inspector or spec reviewer usually wants to see on a submittal for threaded iron piping.
5) Do I need a bushing to take a 2 inch line down to a 1 inch branch?
Not with this fitting. The 2 x 2 x 1 tee reduces at the branch on its own, so you run 2 inch straight through and tap 1 inch off the side without stacking a 2 x 1 bushing into a straight 2 inch tee. One less joint to seal, and the reducing branch is cast to ASME B16.3 dimensions.
6) Is this a standard or extra heavy malleable iron tee?
Standard pattern (STD), the Class 150 style fitting covered by ASME B16.3. If your drawing calls for extra heavy or Class 300 on a higher pressure line, this is not the right fitting.
7) What is the ASC part number for the 2 x 2 x 1 black tee?
Order it by MPN 310049200 from ASC Engineered Solutions. That number covers the standard pattern black malleable iron reducing tee with all three ends FPT.
How fast can I get the ASC Engineered Solutions 310049200 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the ASC Engineered Solutions 310049200 come with a warranty?
Absolutely. The ASC Engineered Solutions 310049200 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the ASC Engineered Solutions 310049200?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the ASC Engineered Solutions 310049200 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.