You may also like
3-in-1 Flip Impact Socket
66044 - spec sheet
Features
- Deep well socket with 1/2-Inch drive for a variety of pole line hardware installation and removal
- Cross hole design helps maintain socket connection to adapter or impact wrench
- 1/2-Inch to 3/8-Inch square adapter has a black manganese phosphate finish for rust resistance
- Socket is color coded to quickly identify sizes with a single band and slotted side with a double band
- Flip Impact Socket features an alignment slot to tighten and loosen most eyelet style hardware
- Socket combines two common socket sizes in one tool, 9/16-Inch and 3/4-Inch hex
- Slotted Socket, Hands-Free Adjustment
- High-torque impact rated, 12-Point design is easier to position and works with square fasteners
Warnings
- Always wear approved eye protection.
66044 - spec sheet
Manufacturer Resources
Spec Sheet
Product Specs
- Case Included:
- No
- Country Of Origin:
- Taiwan
- Drive Size:
- 1/2"
- Number Of Pieces:
- 2
- Number Of Points:
- 12
- Overall Height:
- 1.2" (3 cm)
- Overall Length:
- 4.2" ( 10.7 cm)
- Overall Width:
- 1.2" (3 cm)
- Socket Size:
- 3/4" x 9/16"
- Standards:
- ASME B107.110
- Department:
- Electrical
- Product Group:
- Safety Equipment
- Product Subgroup:
- PPE & Wearables
- Product Type:
- Impact Rated
- Product Finish:
- Black Manganese Phosphate
- Product Details:
- Impact Rated
- Product Height:
- 1.1600 in
- Product Material:
- Steel
- Product Weight:
- 0.4300 lbs
- Product Width:
- 1.1600 in
- Product Depth:
- 3.0000 in
Klein Tools 66044 – Frequently Asked Questions
1) What socket sizes does the Klein Tools 66044 flip socket cover?
The 66044 flip socket is a two-sided deep well socket covering 9/16-inch and 3/4-inch hex, the two sizes most common on pole line hardware. Flip it end for end to change size, so one tool replaces two sockets in the bucket. Sizes are color coded, a single band on one end and a double band on the slotted end, so you can pick the right end without reading stamps in low light.
2) Will the Klein 66044 socket fit my 3/8-inch drive impact wrench?
The socket itself is 1/2-inch drive, but the 66044 ships as a 2-piece set that includes a 1/2-inch to 3/8-inch square adapter, so it runs off either a 1/2-inch or a 3/8-inch drive impact wrench. The adapter carries a black manganese phosphate finish for rust resistance.
3) Is this Klein socket rated for use on an impact wrench or just a hand ratchet?
It is an impact rated socket, built in steel for high-torque impact use, and it meets ASME B107.110, the standard covering impact sockets. A cross hole in the body keeps the socket pinned to the adapter or wrench so it doesn't walk off under hammering.
4) What is the slot on the end of the Klein 66044 socket for?
That alignment slot lets the socket drop over eyelet style hardware, the bolts with an eye or loop on the shank that a plain socket will not clear. Line the eye up with the slot and you can run the nut down without removing the eyelet. It is a hands-free adjustment, no second tool holding the hardware.
5) Will the 12-point socket work on square nuts and bolts on pole line hardware?
Yes. The 66044 uses a 12-point broach, which engages square fasteners as well as hex, and gives you twice as many engagement positions as a 6-point when you are working tight against a crossarm or in a bucket with limited swing.
6) How long is the Klein 66044 socket, and will it reach down a long bolt?
It is a deep well socket measuring 4.2 inches (10.7 cm) overall, with 1.2 inch height and width, so it swallows plenty of exposed thread on through bolts and machine bolts. Whole thing weighs 0.43 lbs, light enough to carry up on a belt.
7) Does the Klein 66044 come with a case?
No case is included. You get two pieces, the flip socket and the 1/2-inch to 3/8-inch square adapter, and nothing else. If you want it stored, plan on your own socket rail or pouch.
8) Will the black finish on this Klein impact socket hold up to outdoor line work?
The adapter is finished in black manganese phosphate, a corrosion-resistant coating rather than a decorative plating, which is what you want on a tool living in a truck bed or bucket. Note it is a rust-resistant finish, not stainless, so wipe it down after wet work.
How fast can I get the Klein Tools 66044 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Klein Tools 66044 come with a warranty?
Absolutely. The Klein Tools 66044 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Klein Tools 66044?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Klein Tools 66044 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.