Southwire SPH300-24 300 AWG SIMPULL HEAD 24" PULLING DEVICE

The SPH300-24 is sized for 300 kcmil conductor and comes in a 24 inch configuration. Southwire builds the SIMpull head line in sizes from 1 AWG up to 1000 kcmil, so if your feeder is a different size you order the matching head rather than forcing this one.

Profile is the whole point of the SIMpull head. Southwire calls it the lowest profile head available, and the SPH300-24 measures 1.6 in height, 3.9 in width, with a 12.6 extension, so it adds very little bulk around the conductor going into the sweep.

Five heads ship in the inner pack, which is what you want when you are pulling a three or four conductor run plus a ground and need one head per conductor.

Staggered lengths let each conductor's head sit at a different point along the pull, so the heads do not bunch into one fat bundle at the leading edge. That keeps the nose of the pull closer to the diameter of the conductors themselves and is a large part of the time saved on a multi-conductor feeder pull.

A field-built head means stripping, bending over strands, taping, and adding a basket grip, and the result is bulkier and inconsistent from conductor to conductor. The SPH300-24 is a factory head on the conductor size it is matched to, with a 1.6 by 3.9 profile and a 12.6 extension, so every conductor in the pull presents the same small nose. Choose a basket grip over a head only when you are pulling a size you do not have a matched head for.

Steel construction, silver in color, and it weighs 0.725 per head. That matters on a long overhead or riser pull where every head you add to the rope is weight the winch has to carry.

Southwire classifies the SPH300-24 as commercial. It is a factory pulling head for 300 kcmil conductor, which is feeder and service territory rather than branch circuit wiring, so it belongs on commercial and industrial installs.