B-Line 10250T4619 30.5 mm, Heavy-Duty Joystick Operator

The 10250T4619 joystick operator carries NEMA 3, 3R, 4, 4X, 12 and 13 ratings, so it holds up in rain and sleet outdoors (3, 3R), against hosedown and splashing water (4), in corrosive/washdown areas (4X), and against dust, drips and coolant in industrial enclosures (12, 13). That covers most exterior control stations and food, chemical or wet process plants.

It mounts in a standard 30.5 mm pushbutton hole, the heavy-duty size used across the 10250T line. If your existing panel is punched for 30.5 mm oiltight devices, the joystick drops into the same opening as the pushbuttons and selector switches already in it.

Four-position, with the movements identified as DOWN and RIGHT. If your machine needs travel in all four axes with separate contacts on each, check the position designation before ordering, because the joysticks in this family are built to specific position patterns rather than one universal arrangement.

This joystick is built with an overcurrent latch, so the operator holds its actuated state on an overcurrent event rather than springing back. That matters when you are specifying a hoist, crane or conveyor control where the joystick has to stay latched for the protective circuit to be recognized and reset deliberately.

A joystick is the right choice when one hand has to command more than one direction without leaving the control, which is why they show up on crane pendants, hoists and material handling stations. Individual 30.5 mm pushbuttons are better when each function is independent and you want positive, single-purpose actuation an operator cannot bump into. The 10250T4619 is the joystick form, four-position, in the same 30.5 mm heavy-duty panel size as the pushbuttons, so the two can share a panel.

Order it as 10250T4619, from the 10250T heavy-duty 30.5 mm operator family. That number identifies the joystick operator with the four-position pattern and the overcurrent latch, so quoting it alone gets the right build.