You may also like
3/4 INCH EMT LRL CONDUIT BODY
Manufacturer Resources
Product Specs
- Application:
- For Use with EMT Conduit
- Number Of Batteries:
- 0
- Product Group:
- Conduit & Fittings
- Product Type:
- Conduit Body - Series B - EMT
- Department:
- Electrical
- Product Subgroup:
- Conduit Bodies
- Product Material:
- Aluminum Die Cast
Red Dot BLRL-2 – Frequently Asked Questions
1) Will the Red Dot BLRL-2 conduit body work with 3/4 inch EMT?
Yes. The BLRL-2 is a 3/4 inch LRL conduit body built for EMT conduit, so it takes 3/4 inch EMT at both openings. It will not accept rigid or IMC threaded conduit, since Series B bodies for EMT use a compression or setscrew style EMT connection rather than threads.
2) Does the BLRL-2 come with a cover and gasket, or do I order those separately?
Order the cover and gasket as separate items. Series B conduit bodies like the BLRL-2 are sold as the body itself; the matching cover plate, gasket and cover screws are ordered to suit the body size, so plan on a 3/4 inch Series B cover and gasket per body to close the opening.
3) What does the LRL designation mean on a conduit body, and when do I use it instead of an LR or LL?
LRL means the body has a back opening plus side openings on both left and right. An LR gives you a right-hand side outlet, an LL a left-hand one; the LRL covers both, so you can run the conduit out either side without stocking two different bodies or caring about orientation at the wall. Electricians often spec the LRL on a job where the pull direction is not settled until install.
4) Is the Red Dot BLRL-2 conduit body metal or plastic?
Die cast aluminum. That makes the BLRL-2 a good match for aluminum or steel EMT runs where you want a corrosion resistant, non-ferrous body, and it keeps the weight down on overhead work compared with a malleable iron body.
5) Can I use a 3/4 inch LRL conduit body as a pull point or junction for conductors?
Yes, that is what it is for. The BLRL-2 gives you an access opening to pull and reposition conductors where an EMT run changes direction, which is far easier than trying to pull through a bend. It is a pull and access fitting, not a device box, so it is not intended to house splices in all applications and it is not rated to hold a receptacle or switch.
6) What is the exact part number to order the Red Dot 3/4 inch EMT LRL body?
Red Dot BLRL-2 is the manufacturer part number. The B prefix identifies the Series B aluminum EMT line, LRL is the body configuration, and the -2 is the 3/4 inch trade size.
How fast can I get the Red Dot BLRL-2 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Red Dot BLRL-2 come with a warranty?
Absolutely. The Red Dot BLRL-2 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Red Dot BLRL-2?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Red Dot BLRL-2 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.