You may also like
3/4 TO 1/2IN FEMALE REDUCER IRON
Manufacturer Resources
Product Specs
- Number Of Batteries:
- 0
- Product Group:
- Conduit & Raceway
- Product Type:
- Reducer
- Department:
- Electrical
- Product Subgroup:
- Conduit Fittings
- Product Material:
- Malleable Iron
Thomas & Betts 1250-TB – Frequently Asked Questions
1) What size conduit does the Thomas & Betts 1250-TB reducer adapt?
The 1250-TB takes a 3/4 inch female thread down to a 1/2 inch female thread, so it joins 3/4 inch threaded conduit or a 3/4 inch hub to 1/2 inch threaded conduit. Both ends are female, which means you need male threads on both sides of the joint (rigid or IMC conduit threads, or a nipple).
2) Can I use the 1250-TB to connect 1/2 inch EMT to 3/4 inch conduit?
Not directly. The 1250-TB has threaded female openings, and EMT is unthreaded. You would need an EMT connector or coupling with a male thread to land in the 1/2 inch side. Threaded rigid and IMC conduit screws straight in.
3) Is the 1250-TB reducer steel or plastic?
Malleable iron. That gives it the strength for threaded rigid or IMC runs and makes it suitable where a PVC fitting would not hold up mechanically. Iron fittings in damp or corrosive locations need their finish intact, so handle the threads carefully during install.
4) Do I need a reducing bushing or a female reducer for stepping 3/4 conduit down to 1/2?
It depends which way the threads run. A reducing bushing threads into a 3/4 inch female hub and gives you a 1/2 inch female opening on the inside. The Thomas & Betts 1250-TB is a female-to-female reducer, so it goes between two male-threaded ends, a 3/4 inch conduit end on one side and a 1/2 inch conduit or nipple on the other. If you are reducing at a box hub rather than between two conduit ends, a bushing is the right part.
5) What is the Thomas & Betts part number for a 3/4 to 1/2 inch iron female conduit reducer?
1250-TB is the number to order. It is a single-configuration fitting, 3/4 inch to 1/2 inch, malleable iron, with no finish or size options to specify.
How fast can I get the Thomas & Betts 1250-TB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Thomas & Betts 1250-TB come with a warranty?
Absolutely. The Thomas & Betts 1250-TB is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Thomas & Betts 1250-TB?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Thomas & Betts 1250-TB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.