You may also like
3/4IN WIREMESH GRIP SST .250-.375
Manufacturer Resources
Product Specs
- Number Of Batteries:
- 0
- Product Type:
- Wiremesh Grips
- Department:
- Electrical
- Product Material:
- Stainless Steel
Thomas & Betts WMG-PC7 – Frequently Asked Questions
1) What cable diameter does the Thomas & Betts WMG-PC7 wire mesh grip hold?
The WMG-PC7 grip is sized for cable in the .250 to .375 inch outside diameter range. Measure the jacket OD of the cable you are pulling or supporting, not the conductor size, before you pick the grip. Anything outside that window needs a different grip size.
2) What size fitting or hub does the WMG-PC7 wire mesh grip fit?
It is a 3/4 inch grip, so it mates to 3/4 inch trade size hub or fitting. Pair it with the 3/4 inch connector or enclosure opening on your run.
3) I am pulling 1/2 inch OD cable. Can I still use the WMG-PC7?
No. The WMG-PC7 is built for .250 to .375 inch cable only. A half inch jacket will not seat correctly in the weave, and an oversized cable in an undersized grip will not develop proper holding force. Step up to a larger grip rated for that diameter.
4) Is the Thomas & Betts WMG-PC7 grip stainless steel or galvanized?
Stainless steel mesh. That is the reason to pick it over a plain steel grip on wet, washdown, coastal, or corrosive-atmosphere installations where a carbon steel weave would rust out.
5) What does a wire mesh grip like the WMG-PC7 actually do on a cable run?
A wire mesh grip is a woven sleeve that closes down on the cable jacket as load is applied, so the weight of the cable and any pulling or vibration force is carried by the grip instead of by the terminations inside the box. On a vertical drop or a long support span it keeps strain off the conductors. The WMG-PC7 covers 3/4 inch trade size on cable of .250 to .375 inch diameter.
6) What is the exact part number to order this Thomas & Betts 3/4 inch stainless wire mesh grip?
Order it as Thomas & Betts WMG-PC7. That designation covers the 3/4 inch stainless steel grip for .250 to .375 inch cable, and it is the number to put on a purchase order or match against a spec sheet.
7) Does the WMG-PC7 grip need any batteries or power?
None. It is a purely mechanical stainless steel woven grip with no electrical or battery component.
How fast can I get the Thomas & Betts WMG-PC7 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Thomas & Betts WMG-PC7 come with a warranty?
Absolutely. The Thomas & Betts WMG-PC7 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Thomas & Betts WMG-PC7?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Thomas & Betts WMG-PC7 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.