Metallics JSHC38114 3/8-16 x 1...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$51.59
$1.69
Image coming soon

Metallics JSHC38114 3/8-16 x 1-1/4 in. Socket Head Hex Cap Screws - Alloy Steel Black - Each

(No reviews yet) Write a Review

Model: JSHC38114

In Stock (leaves warehouse same day if ordered before 3pm ET)

$51.59
$1.69
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
3/8-16 x 1-1/4 in. Socket Head Hex Cap Screws - Alloy Steel Black - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Cap screws of a length 3D or greater, where D equals the nominal diameter of the screw, are subject to tensile strength, yield strength, elongation and reduction of area testing.

  • Features

    • Socket head with Hex Drive
    • Supplies greater tensile strength than equivalent sizes of Grade-5 or Grade-8 hex head cap screws while requiring less surface area or counterbore since the fastener is intenally wrenched.
    • Alloy Steel Black Material
    • Elongation is 10% minimum (applies to machined specimens of lenglh at least 4D where D equals the nominal diameter of the screw) and Reduction of Area is 33% minimum (applies to machined specimens)
    • 3/8-16 Diameter, 1-1/4" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Country Of Origin:
MUL
Dimensional Standard:
ASME B18.3-2012
Division:
Electrical H1
Drive Type:
Hex
Fastener Head Height:
0.368 - 0.375 in.
Fastener Head Type:
Socket
Fastener Head Width:
0.55 - 0.562 in.
Fastener Length:
1/1/04
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell C39
Hex Size:
16-May
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Socket_Head_Cap_Screw_Alloy_Zinc.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Product Family:
Electrical Supplies
Product Group:
Fasteners
Product Height:
5.75 in
Product Length:
3.5 in
Product Weight:
5.2 lbs
Product Width:
3.5 in
Slot Depth:
0.182
Sub Division:
Electrical-E H2
Tensile Strength:
180000 psi minimum
Thread Per Inch:
16
Thread Type:
UN
Wall Thickness:
0.143
Yield Strength:
162000 psi minimum
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Cap Screw
Type2:
Cap Screw
Series:
SHC
Product Finish:
Black
Product Details:
Cap Screw
Product Material:
Alloy Steel Black

Metallics JSHC38114 – Frequently Asked Questions

1) What thread and size are the Metallics JSHC38114 socket head cap screws?
They are 3/8-16 x 1-1/4 inch screws, so a 3/8 inch nominal diameter with 16 threads per inch in the UN thread series. That is the standard coarse 3/8 thread, so it mates with any 3/8-16 tapped hole or nut.
2) How strong is a 3/8-16 alloy steel socket head cap screw compared with a Grade 8 hex bolt?
The Metallics SHC alloy steel screw is rated at 180,000 psi minimum tensile and 162,000 psi minimum yield, with a hardness of Rockwell C39. That puts it above a comparable Grade 8 hex head cap screw, which is a 150,000 psi minimum tensile fastener, and it does it in a smaller head footprint because it is internally wrenched.
3) How much counterbore clearance do I need for these socket head cap screws?
Size the counterbore off the head: the head measures 0.55 to 0.562 inch across and 0.368 to 0.375 inch high. Bore the pocket at least that deep if you want the head flush or below the surface, and leave clearance around the 0.562 inch maximum head diameter. The screws are made to ASME B18.3-2012, so standard socket head counterbore charts apply.
4) Do these Metallics cap screws meet Buy American or ARRA requirements for a public project?
No. The JSHC38114 is not Buy American compliant and is not ARRA compliant, and country of origin is listed as multiple. If your job carries a domestic sourcing clause, this is not the fastener to submit.
5) What size hex key drives a 3/8-16 socket head cap screw?
It takes a 5/16 inch hex key. The drive is an internal hex socket, and the socket depth is 0.182 inch, so a standard L-key or hex bit engages fully without bottoming out.
6) How are the Metallics JSHC38114 cap screws packaged, and is there a minimum order?
They ship in a jar of 100, and 100 is the order minimum, so you are buying by the jar rather than by the piece. Metallics lists other sizes and quantities in the SHC series on request.
How fast can I get the Metallics JSHC38114 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSHC38114 come with a warranty?
Absolutely. The Metallics JSHC38114 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSHC38114?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSHC38114 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!