Metallics JSHC38112 3/8-16 x 1...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$192.86
Image coming soon

Metallics JSHC38112 3/8-16 x 1-1/2 in. Socket Head Hex Cap Screws - Alloy Steel Black - Each

(No reviews yet) Write a Review

Model: JSHC38112

In Stock (leaves warehouse same day if ordered before 3pm ET)

$192.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
3/8-16 x 1-1/2 in. Socket Head Hex Cap Screws - Alloy Steel Black - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Cap screws of a length 3D or greater, where D equals the nominal diameter of the screw, are subject to tensile strength, yield strength, elongation and reduction of area testing.

  • Features

    • Elongation is 10% minimum (applies to machined specimens of lenglh at least 4D where D equals the nominal diameter of the screw) and Reduction of Area is 33% minimum (applies to machined specimens)
    • 3/8-16 Diameter, 1-1/2" Length
    • Socket head with Hex Drive
    • Supplies greater tensile strength than equivalent sizes of Grade-5 or Grade-8 hex head cap screws while requiring less surface area or counterbore since the fastener is intenally wrenched.
    • Alloy Steel Black Material

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.3-2012
Division:
Electrical H1
Drive Type:
Hex
Fastener Head Height:
0.368 - 0.375 in.
Fastener Head Type:
Socket
Fastener Head Width:
0.55 - 0.562 in.
Fastener Length:
1/1/02
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell C39
Hex Size:
16-May
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Socket_Head_Cap_Screw_Alloy_Zinc.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
5.75 in
Product Length:
3.5 in
Product Weight:
2.92 lbs
Product Width:
3.5 in
Slot Depth:
0.182
Sub Division:
Electrical-E H2
Tensile Strength:
180000 psi minimum
Thread Per Inch:
16
Thread Type:
UN
Wall Thickness:
0.143
Yield Strength:
162000 psi minimum
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Cap Screw
Type2:
Cap Screw
Series:
SHC
Product Finish:
Black
Product Details:
Cap Screw
Product Material:
Alloy Steel Black

Metallics JSHC38112 – Frequently Asked Questions

1) Will a 3/8-16 socket head cap screw thread into my existing 3/8-16 tapped hole or nut?
Yes. The Metallics JSHC38112 is a 3/8 inch diameter screw with 16 threads per inch, UN thread form, so it mates with any standard 3/8-16 UNC tapped hole, nut, or strut channel nut. Usable length is 1-1/2 inches under the head.
2) Is this socket head cap screw stronger than a Grade 5 or Grade 8 hex bolt?
The alloy steel socket head carries 180,000 psi minimum tensile and 162,000 psi minimum yield, which is above what equivalent sizes of Grade 5 or Grade 8 hex head cap screws deliver, and it does it in a smaller head. Hardness is Rockwell C39.
3) Can I use these black alloy steel cap screws outdoors or in a wet location?
Keep them dry. The JSHC38112 is alloy steel with a plain black finish, which offers no meaningful corrosion protection on its own, so it suits indoor mechanical and electrical assembly, strut, equipment mounting, and panel work. For damp, exterior, or washdown locations choose a zinc plated or stainless cap screw instead.
4) Are these cap screws acceptable on a Buy American or ARRA funded project?
No. The JSHC38112 is not Buy American compliant and is not ARRA compliant; country of origin is listed as multiple. On federally funded work with domestic sourcing requirements you will need a domestically produced fastener instead.
5) What size hex key do I need to drive the JSHC38112 socket head cap screw?
It is internally wrenched with a hex key, not a wrench on the outside of the head. Socket depth is 0.182 inch, so a standard short-arm Allen key seats fully. Keep a hex key set on the truck; there is no external flat to grab if the socket gets packed with paint or debris.
6) Do these cap screws meet a published dimensional standard for inspection submittals?
Yes, they are built to ASME B18.3-2012, the dimensional standard for socket head cap screws, so head and socket geometry will match what an inspector or a drawing calls out for a 3/8-16 socket head cap screw.
7) How are the Metallics JSHC38112 cap screws packaged and what is the minimum order?
They ship in a jar, with a minimum of 100 pieces per jar. Other sizes and quantities are available by request if the job needs a different length or diameter.
8) What trades actually use a 3/8-16 x 1-1/2 socket head cap screw like this?
Metallics lists the field application as the electrical, plumbing, heating and air conditioning industries. In practice that means strut and channel assembly, hanger and bracket connections, equipment and panel mounting, and anywhere a high strength bolt has to sit in a tight counterbore with no room to swing a wrench.
How fast can I get the Metallics JSHC38112 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSHC38112 come with a warranty?
Absolutely. The Metallics JSHC38112 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSHC38112?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSHC38112 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!