Metallics RSB66 3/8-16 x 1 in....
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$192.86
Metallics RSB66 3/8-16 x 1 in. Round Head Combo Stove Bolt Screws with Hex Nut - Steel Zinc - 100qty

Metallics RSB66 3/8-16 x 1 in. Round Head Combo Stove Bolt Screws with Hex Nut - Steel Zinc - Each

(No reviews yet) Write a Review

Model: RSB66
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$192.86
Adding to cart… The item has been added
Free Shipping on orders over $199.99
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
3/8-16 x 1 in. Round Head Combo Stove Bolt Screws with Hex Nut - Steel Zinc - 100qty

  • Additional Notes

    • Standard Package Square Plastic Jar | Two drives in one head | other sizes and quantities available by request | Steel machine screws which have a nominal diameter smaller than #4 are not subject to tensile testing. No. 4 and No. 5 machine screws which are shorter than 1/2" are not subject to tensile testing. Steel machine screws of diameters No. 6 to 1/2" inclusive, which are shorter than either 1/2" or 3D (where D is the nominal screw size in inches) are not subject to tensile testing. Such steel machine screws of a size to be tested shall meet the tensile load requirements listed above.

  • Features

    • Round head with slotted and Phillips Drive
    • Includes Hex nut
    • Hex Machine Screw Nut is designed to be used specifically with machine screws.
    • Steel Zinc Material
    • 3/8-16 Diameter, 1" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ANSI B18.6.3
Division:
Electrical H1
Drive Type:
Slotted/Phillips
Driver Size:
#4
Fastener Head Height:
0.237 - 0.256 in.
Fastener Head Type:
Round
Fastener Head Width:
0.67 - 0.708 in.
Fastener Length:
1
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell B70-B100
Language Code:
EN
Material Standard:
AISI 1006 - 1022
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Stove_Bolt.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Clamshell
Phillips Recess Depth:
0.228
Phillips Recess Diameter:
0.374 - 0.387
Phillips Recess Width:
0.064
Product Group:
Fasteners
Product Height:
5.75 in
Product Length:
3.5 in
Product Weight:
5.67 lbs
Product Width:
3.5 in
Slot Depth:
0.117 - 0.155
Slot Width:
0.081 - 0.094
Sub Division:
Electrical-E H2
Tensile Strength:
60000 psi minimum
Thread Per Inch:
16
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Stove Bolt
Type2:
Stove Bolt
Series:
RSB
Product Finish:
Zinc
Product Details:
Stove Bolt
Product Material:
Steel Zinc

Metallics RSB66 – Frequently Asked Questions

1) What size and thread does the Metallics RSB66 stove bolt have?
The RSB66 is a 3/8-16 stove bolt, 1 inch long, with 16 threads per inch. Each bolt ships with a matching hex machine screw nut, so you are not sourcing nuts separately.
2) Will the RSB66 match a spec that calls for ANSI B18.6.3 machine screws?
Yes. The RSB66 is dimensioned to ANSI B18.6.3, the machine screw standard, so head, slot and recess geometry will match anything specified to that standard. The Phillips recess measures 0.374 to 0.387 in. diameter at 0.228 in. depth.
3) Do Metallics RSB66 stove bolts qualify for a Buy American or ARRA funded job?
No. The RSB66 is not Buy American compliant and is not ARRA compliant, with country of origin listed as multiple. On federally funded or domestic-content work, these will not pass submittal and you need a domestic sourced fastener.
4) Can I drive these stove bolts with a Phillips bit, or do I need a slotted screwdriver?
Either works. The RSB66 has a combination round head cut with both a slot and a Phillips recess, so you can run it with a flat blade or a Phillips. The recess takes a #4 driver. Slot width is 0.081 to 0.094 in. and slot depth 0.117 to 0.155 in., so a wide cabinet-tip blade will cam out; use a bit sized to the slot.
5) Is the zinc finish on these stove bolts good for outdoor or damp locations?
Zinc plated steel is the finish here, which suits dry interior and general indoor MRO work. It is a sacrificial plating, not stainless, so for exterior, wet, or corrosive locations you want a stainless or hot dip galvanized fastener instead.
6) How do these Metallics stove bolts come packaged, and what is the minimum order?
Minimum order is 100 pieces, supplied by the jar. The standard package is a square plastic jar, with clamshell listed as the pack type. Bolts and their hex nuts come together in the same count, so a jar of 100 gives you 100 complete bolt and nut assemblies.
How fast can I get the Metallics RSB66 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics RSB66 come with a warranty?
Absolutely. The Metallics RSB66 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics RSB66?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics RSB66 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!