You may also like
3/8X1/8 BLK MI 90 ELL
Manufacturer Resources
Product Specs
- Dimensions Specification:
- ASME B16.3
- End Conn Size 1:
- FPT
- End Conn Size 2:
- FPT
- Material Specification:
- ASTM A-197
- Pressure Rating Specification:
- ASME B16.3
- Size 1:
- 0.375
- Size 2:
- 0.125
- Strength:
- STD
- Thread Specification:
- ASME B1.20.1
- Ul Fm:
- Yes
- Department:
- Plumbing
- Product Group:
- Pipe Fittings
- Product Subgroup:
- Elbows
- Product Type:
- 90° Elbow
- Product Finish:
- Black
- Product Material:
- Malleable Iron
- Product Weight:
- 0.12 lbs
ASC Engineered Solutions 310007208 – Frequently Asked Questions
1) Is the ASC 3/8 x 1/8 black malleable iron 90 degree elbow a reducing elbow?
Yes, it's a reducing ell. One end takes 3/8 inch pipe, the other 1/8 inch, so it turns the run 90 degrees and steps the size down in the same fitting. Both ends are female pipe thread (FPT), so it threads onto male-threaded pipe nipples on each side.
2) Can I use a black malleable iron 90 elbow on a potable water line?
No. Black malleable iron is for gas, air, and non-potable service such as fuel gas piping, sprinkler and compressed air. For potable water you want brass, copper, or galvanized rather than a black finish fitting, because uncoated black iron rusts in water service.
3) Is this ASC 90 degree elbow UL listed and FM approved for sprinkler work?
It carries UL/FM recognition, which is what an inspector looks for on fire protection piping. It's also rated standard (STD) pressure class per ASME B16.3, the malleable iron threaded fitting standard.
4) What standards does this malleable iron reducing ell meet for a submittal?
Three specs cover it: ASTM A-197 for the malleable iron casting, ASME B16.3 for dimensions and pressure class, and ASME B1.20.1 for the threads. That combination is what most mechanical submittals ask for on Class 150 black threaded fittings.
5) I need to drop from 3/8 inch pipe down to a 1/8 inch gauge port. Is this the right fitting?
That's exactly what a 3/8 x 1/8 reducing ell does. The small female end accepts a 1/8 inch NPT male gauge, sensor, or test plug while the large end stays on the 3/8 inch run, so you don't need a separate bushing. Both openings are female, so the gauge or instrument must have male threads.
How fast can I get the ASC Engineered Solutions 310007208 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the ASC Engineered Solutions 310007208 come with a warranty?
Absolutely. The ASC Engineered Solutions 310007208 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the ASC Engineered Solutions 310007208?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the ASC Engineered Solutions 310007208 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.