You may also like
3M™ Heat Shrink Thin-Wall Tubing FP-301-1/4-48"-Black-12 Pcs, 48 in Length sticks, 12 pieces/case
7100007366 - spec sheet
Features
- HIGH-STRENGTH PROTECTION: Balances electrical, physical, and chemical properties for various industrial and military applications
- KEY SPECIFICATIONS: UL Listed, File E-39100, SAE AS23053/5, Class 1 (all colors), Class 2 (clear), CSA Certified, and RoHS 2011/65/EU Compliant
- FLAME-RETARDANT TUBING: For applications up to 600V (clear is not flame retardant)
- A VARIETY OF APPLICATIONS: Offers a 2:1 shrink-fit ratio and serves as protection in wire-harnessing, split-resistance covering, wire marking, wire bundling, and component packaging
- FOR DEMANDING CONDITIONS: Performs at an operating temperature up to 275 °F (135 °C)
7100007366 - spec sheet
Manufacturer Resources
3M Heat Shrink Tubing & Devices Catalog
Product Specs
- Tensile Strength Imperial:
- 2400 Pound-Force Per Square Inch
- Shelf Life:
- 3600
- Department:
- Electrical
- Ul Bug Temperature Celsius:
- 125 Degrees Celsius
- Manufacturing Origin:
- USA
- Country Of Origin:
- United States
- Overall Length Imperial:
- 48.0 in
- Flammability Rating:
- UL 224 All Tubing Flame Test
- Etim Class 7 0:
- EC000217
- Flame Retardant:
- Yes
- Maximum Operating Temperature Celsius:
- 135
- Minimum Shrink Temperature Celsius:
- 100
- Shrink Ratio:
- 2:01
- Non Corrosive:
- Yes
- Solution For:
- Access Network: FTTH/FTTB/CATV
- Operating Temperature Range Celsius:
- -55 °C to +135 °C
- Rohs Eu Comments:
- RoHS 2011/65/EU compliant without exemption
- Maximum Operating Temperature Celsius Uom:
- Degree
- Maximum Operating Temperature Fahrenheit:
- 275.0 Degree
- Etim Class 8 0:
- EC000217
- Product Form:
- 48 in (1.22 m) sticks
- Tubing Type:
- Single Wall (Thin)
- Mil Spec:
- AMS-DTL-23053/5, Class 1
- Operating Temperature Range Fahrenheit:
- -67 °F to 275 °F
- Ul Approval:
- Yes
- Ul Bug Temperature Fahrenheit:
- 257 Degrees Fahrenheit
- Elongation Uom:
- %
- Operating Temperature Fahrenheit:
- -67 °F to 275 °F
- Product Material:
- Polyolefin
- Ul Bug Voltage:
- 600 Volt
- Operating Temperature Celsius:
- -55 to 135 Degrees Celsius
- Heat Shrink Type:
- Single-Wall Polyolefin Heat Shrink Tubing
- Product Type:
- Heat Shrink Tubing
- Product Group:
- Cable Management & Identification
- Product Subgroup:
- Electrical Sleeves
3M 7100007366 – Frequently Asked Questions
1) How hot does a heat gun need to be to shrink 3M FP-301 tubing?
Minimum shrink temperature is 100 C (212 F). A standard electric heat gun gets there easily; the trick is keeping the gun moving around the circumference so the polyolefin recovers evenly instead of scorching on one side. Continuous service rating afterward runs -67 F to 275 F (-55 C to 135 C).
2) Is 3M FP-301 heat shrink rated for 600 volt circuits?
Yes. The UL bug rating on FP-301 is 600 volts at 125 C (257 F), and it is UL Listed under File E-39100. That covers the great majority of commercial branch-circuit and control wiring work. It is also CSA Certified.
3) Is thin-wall single-wall tubing the right choice, or do I need dual-wall adhesive-lined?
FP-301 is single-wall thin-wall polyolefin. It is the right pick for wire marking, bundling, strain relief at terminations, split-resistant covering and component packaging, all indoors or in protected locations. It is not adhesive lined, so for direct burial, outdoor splices, or anything that has to seal out water and act as a strain-relieved moisture barrier, order a dual-wall adhesive-lined tubing instead.
4) Do these come as sticks or on a spool?
Sticks. FP-301 here ships as 48 inch (1.22 m) straight lengths, 12 pieces per case. Sticks suit panel and harness work where you are cutting short sleeves and want the tubing straight with no coil memory; if you need long continuous runs for cable jacket repair, a spooled format is the better buy.
5) Will FP-301 survive under the hood or near hot equipment?
Continuous operating range is -55 C to +135 C (-67 F to 275 F), which covers most engine-bay, motor-lead and industrial enclosure temperatures. It is also non-corrosive, so it will not attack copper conductors or terminal plating over time. What it does not have is an internal adhesive liner, so it is not a moisture seal on its own.
6) Is 3M FP-301 RoHS compliant and made in the USA?
Both. FP-301 is RoHS 2011/65/EU compliant without exemption, and country of origin is the United States. Those are the two lines institutional and government procurement most often needs on file before a submittal goes through.
7) How tough is FP-301 tubing once it is shrunk down?
Tensile strength is 2,400 psi, which is what lets it hold up as split-resistant covering over bundles that get flexed or pulled. Combined with the 135 C rating and the non-corrosive polyolefin, it holds together in industrial and military service rather than just cosmetically covering a joint.
How fast can I get the 3M 7100007366 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the 3M 7100007366 come with a warranty?
Absolutely. The 3M 7100007366 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the 3M 7100007366?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the 3M 7100007366 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.