3M™ Reflective Construction Safety Vest with 5 Point Tear Away, Class 2 , Hi-Viz Yellow, 94617-80030-PS, 5/cs
Features
- Two large interior pockets for portable storage
- Adjustable with hook and loop closures to fit most wearers
- Meets ANSI/ISEA 107-2010 Class 2 and Federal Highway Mandate - 2009 Manual of Uniform and Traffic Control Devices
- 3M™ Scotchlite™ Reflective material for 360° visibility and protection
- Five-point tear-away design
- One size fits most
- The Class 2 Construction Safety Vest features a 5-point tear-away design that helps to protects the worker if vest is caught on moving equipment. Includes 2 large pockets. HiViz Yellow Color & 3M Scotchlite™ Silver Tape. ANSI 107-2004, Class 2, FHWA.
- Lightweight mesh for air circulation and faster drying times
- 3M™ Scotchlite™ reflective material safety vests
- 3M™ ANSI Class 2, Adjustable Tear Away Safety Vests are required for workers on sites around traffic and workers around heavy equipment. Designed in fluorescent yellow with 2" 3M™ Scotchlite™ Reflective Material gives the wearer with 360 degree visibility. 3M ANSI Class 2, Adjustable Tear Away Safety Vests are designed for moderate risk use, including construction, utility, school crossing, parking lots and traffic direction. Part of the 3M™ Pro Series Safety Products line that was designed for the way pros think, the way they shop and the way they work
Manufacturer Resources
Product Specs
- 3m Id:
- 70006963303
- Ansi Class Level:
- Class 2
- Flame Resistance Astm D2859 96 :
- No
- Height Metric :
- 20.8 Centimeter
- Length Metric :
- 18.8 Centimeter
- Product Color:
- Hi-Viz Yellow
- Product Height:
- 8.2 Inch
- Product Length:
- 7.4 Inch
- Product Type:
- High Visibility
- Product Width:
- 1 Inch
- Water Resistant:
- No
- Width Metric :
- 2.54 Centimeter
- Department:
- Electrical
3M 94617-80030-PS – Frequently Asked Questions
1) Does the 3M 94617-80030-PS safety vest meet ANSI Class 2 for highway work zones?
Yes. The 3M reflective construction vest is an ANSI/ISEA 107-2010 Class 2 garment and meets the Federal Highway Mandate under the 2009 Manual of Uniform Traffic Control Devices. That makes it acceptable for workers in and around traffic right-of-way and around heavy equipment, which is what Class 2 is written for. It uses 2 inch 3M Scotchlite reflective material for 360 degree visibility.
2) What does the 5-point tear-away design on a construction safety vest actually do?
The vest separates at five points (shoulders, sides, and front closure) so that if the garment snags on moving equipment it pulls apart instead of dragging the wearer in. That is why crews working around augers, conveyors, loaders, and other rotating or moving machinery specify tear-away vests rather than standard pullover styles.
3) Will one size of the 3M 94617 vest actually fit my whole crew?
It is built as one-size-fits-most and adjusts with hook and loop closures, so a single stock item covers a mixed crew without sizing each person. For a facility or fleet buyer that means one part number to reorder instead of a size run. It ships 5 vests per case.
4) What color is the 3M 94617-80030-PS vest, and does it match standard DOT work zone requirements?
Hi-Viz fluorescent yellow with silver 3M Scotchlite reflective tape, which is the common background color specified for roadway and work zone crews under the MUTCD federal highway mandate this vest meets. If your site standardizes on orange, this part number will not match it.
5) Which jobs is a Class 2 vest required for versus a Class 3?
Class 2 is the moderate-risk level and covers construction, utility work, school crossing guards, parking lots, and traffic direction where vehicle speeds and exposure are moderate. Class 3 garments, which add sleeves and more reflective area, are what you move to for high-speed roadway exposure or poor visibility conditions. The 3M 94617 tear-away vest is a Class 2 garment.
6) Is this 3M vest breathable enough for summer outdoor work?
The body is lightweight mesh, which lets air move through and dries faster than a solid-fabric vest. That is the usual choice for summer paving, utility, and traffic control work. It does not shed rain, though, so wet-weather crews need a coated or waterproof Class 2 garment over it.
7) Does the 3M 94617 construction vest have pockets for a radio or notepad?
Two large interior pockets are built in for portable storage, enough for a phone, radio, notepad, or small tools. Note that it is a mesh vest, so anything heavy will hang and shift while you move.
8) What is the 3M ID number for the 94617-80030-PS safety vest?
3M assigns this vest ID 70006963303, and the manufacturer part number is 94617-80030-PS. Procurement teams cross-referencing a 3M contract or standardization list will usually find it under that ID rather than the catalog number.
How fast can I get the 3M 94617-80030-PS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the 3M 94617-80030-PS come with a warranty?
Absolutely. The 3M 94617-80030-PS is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the 3M 94617-80030-PS?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the 3M 94617-80030-PS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.