3M UF2-SPLICEKIT Underground F...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$74.85
3M UF2-SPLICEKIT Underground Feeder (UF) Splice Kit with Heat Shrink Connector

3M UF2-SPLICEKIT Underground Feeder (UF) Splice Kit with Heat Shrink Connector

(No reviews yet) Write a Review

Model: UF2-SPLICEKIT

In Stock (leaves warehouse same day if ordered before 3pm ET)

$74.85
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

3M UF2-SPLICEKIT Underground Feeder (UF) Splice Kit with Heat Shrink Connector

The 3M UF2-SPLICEKIT Underground Feeder (UF) Splice Kit delivers a complete, ready-to-use solution for splicing underground feeder cable in residential and commercial electrical systems. Each kit pairs an 11.7 in (297.2 mm) splice connector with a 20 in (508.0mm) heat shrink tube to form a secure, insulated joint built for below-grade installation conditions. The kit's UF2 designation reflects its engineering specifically for underground feeder (UF) cable, helping ensure the connector and heat shrink tube are matched for a proper fit. Designed as part of 3M's UF2 splice kit lineup, it is supplied 6 kits per case, giving electricians and contractors a convenient way to stock consistent splice repair materials for underground feeder wiring projects. From new underground circuit installation to repair of damaged UF cable runs, this 3M splice kit is built to simplify the splicing process on the job.

Key Features

  • Connector Length: 11.7 in (297.2 mm) splice connector sized to join underground feeder (UF) cable ends securely.
  • Heat Shrink Tube: 20 in (508.0mm) heat shrink tubing shrinks down over the splice connector to form a protective, weather-resistant cover.
  • UF2 Splice Configuration: Purpose-built UF2 splice kit configuration designed specifically for underground feeder cable splicing applications.
  • Underground-Rated Design: Engineered specifically for underground feeder (UF) cable applications rather than general-purpose wiring.
  • Splice Kit Series: Part of 3M's UF2 splice kit series for underground feeder cable connections.
  • Complete Kit: Combines connector and heat shrink tube in a single kit so installers have the components needed for one splice on hand.
  • Case Packaging: Supplied 6 kits per case, making it easy to stock multiple splice repairs for underground feeder cable runs.

Technical Specifications

  • Connector Length: 11.7 in (297.2 mm)
  • Heat Shrink Tube Length: 20 in (508.0mm)
  • Kit Configuration: UF2 Splice Kit
  • Packaging: 6 kits/case

Typical Applications

  • Underground Feeder (UF) Cable Splicing
  • Direct Burial Electrical Wiring Repairs
  • Residential and Commercial Underground Circuit Installation
  • New Underground Circuit Extensions
  • Electrical Contractor Splice Repair Stock

Why 3M?

3M brings decades of experience in electrical splicing and insulation solutions to this splice kit, pairing a properly sized 11.7 in (297.2 mm) connector with a 20 in (508.0mm) heat shrink tube to create a splice built for the demands of underground feeder cable. Supplied 6 kits per case, this 3M splice kit helps electrical contractors keep dependable, consistent splicing materials on hand for both new installations and repair work. Whether used for new underground feeder runs or field repairs, this splice kit gives contractors a straightforward, factory-matched solution for underground splicing needs.

Manufacturer Resources

Spec Sheet

Product Specs

list_batch:
SPB-20260922
Product Type:
Splice Kit
Series:
UF2
Configuration:
Underground Feeder (UF)
Department:
Electrical
Product Subgroup:
Splice Kits
Product Group:
Wire Connectors & Terminals
Voltage Rating:
600V

3M UF2-SPLICEKIT – Frequently Asked Questions

1) Is the 3M UF2-SPLICEKIT rated for direct burial underground feeder cable?
Yes. The UF2-SPLICEKIT is built specifically for underground feeder (UF) cable rather than general-purpose indoor wiring, and it is rated 600V. The kit combines an 11.7 in (297.2 mm) splice connector with a 20 in (508.0 mm) heat shrink tube, so the finished joint is insulated and sealed for below-grade conditions.
2) What comes in a 3M UF2 splice kit, and do I need anything else to make the splice?
Each UF2-SPLICEKIT contains the two parts for one splice: an 11.7 in splice connector and a 20 in heat shrink tube that shrinks down over it. You still need a heat source (torch or heat gun) to recover the tubing, plus your normal cable prep tools. One kit equals one splice, so count your repair points before ordering.
3) Can I repair a shovel-damaged buried UF cable run with this kit instead of pulling new cable?
That is exactly what the UF2 kit is for. It is intended for direct burial wiring repairs as well as new underground circuit installation and extensions, so a damaged section can be cut out and rejoined with the connector and heat shrink tube rather than replacing the full run. One kit covers one splice point.
4) Can I use the 3M UF2 splice kit on a 240V underground circuit to a garage or well pump?
Yes, within its rating. The UF2-SPLICEKIT carries a 600V rating, which covers standard 120V and 240V residential and commercial branch circuits and feeders run in UF cable.
5) Will the 3M UF2 splice kit work on direct burial THWN conductors in conduit instead of UF cable?
The kit is configured for underground feeder (UF) cable, where the connector and heat shrink tube are matched to UF cable geometry. For single conductors in conduit or other cable constructions, use a splice kit specified for that construction rather than the UF2.
6) What is the exact part number to order for the 3M underground feeder splice kit?
Order 3M UF2-SPLICEKIT. That is the manufacturer part number for the UF2 series underground feeder splice kit, supplied six kits per case.
7) How many 3M UF2-SPLICEKIT kits come in a case?
Six kits per case. That is six individual splices, which is why contractors keep a case on the truck for UF cable repairs instead of ordering one at a time.
How fast can I get the 3M UF2-SPLICEKIT delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the 3M UF2-SPLICEKIT come with a warranty?
Absolutely. The 3M UF2-SPLICEKIT is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the 3M UF2-SPLICEKIT?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the 3M UF2-SPLICEKIT from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!