You may also like
3X2 GALV MI 90 ELL
Manufacturer Resources
Product Specs
- Dimensions Specification:
- ASME B16.3
- End Conn Size 1:
- FPT
- End Conn Size 2:
- FPT
- Finish Specification:
- ASTM A-153
- Material Specification:
- ASTM A-197
- Pressure Rating Specification:
- ASME B16.3
- Size 1:
- 3
- Size 2:
- 2
- Strength:
- STD
- Thread Specification:
- ASME B1.20.1
- Ul Fm:
- Yes
- Department:
- Plumbing
- Product Group:
- Pipe Fittings
- Product Subgroup:
- Elbows
- Product Type:
- 90° Elbow
- Product Finish:
- Galvanized
- Product Material:
- Malleable Iron
- Product Weight:
- 3.91 lbs
ASC Engineered Solutions 311011605 – Frequently Asked Questions
1) Is the ASC 3 x 2 galvanized malleable iron 90 degree elbow threaded on both ends, and what thread standard?
Both openings are female pipe thread (FPT), cut to ASME B1.20.1 NPT. It mates with any standard threaded steel or brass pipe nipple of the matching size, no welding or grooving involved. Because both ends are female, you thread pipe or nipples directly into the fitting from each side.
2) Does this ASC elbow reduce from 3 inch to 2 inch pipe?
Yes. It is a reducing 90, 3 inch on one end and 2 inch on the other, so it turns the run and steps the size down in one fitting instead of an elbow plus a separate reducing bushing. Dimensions follow ASME B16.3 for malleable iron threaded fittings.
3) Can I use this galvanized 90 on a fire sprinkler line?
It is UL/FM listed, which is what an AHJ looks for on fire protection piping. It is a standard (STD) class malleable iron fitting with pressure ratings per ASME B16.3. Confirm the class matches what the sprinkler drawing calls for on that run.
4) Is this elbow galvanized well enough for outdoor or wet service?
The zinc coating is hot dip galvanizing to ASTM A-153, the standard for hardware dipped after fabrication, so the threads and body both carry coating. The casting itself is malleable iron to ASTM A-197. That combination is the usual choice for water service, exposed runs, and damp mechanical rooms rather than bare black iron.
5) Should I use a galvanized malleable iron elbow or black iron here?
Galvanized malleable iron is for water and wet or exposed service. Black iron of the same ASME B16.3 pattern is the fitting used on natural gas and fuel oil, where zinc flaking is a concern. Same threads either way (ASME B1.20.1 NPT), so the decision is purely about the medium and the environment, not about fit.
6) What is the part number to order for the ASC 3 x 2 galvanized 90 elbow?
ASC Engineered Solutions part number 311011605. That single number covers the 3 x 2 reducing 90, galvanized, standard class, FPT by FPT.
How fast can I get the ASC Engineered Solutions 311011605 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the ASC Engineered Solutions 311011605 come with a warranty?
Absolutely. The ASC Engineered Solutions 311011605 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the ASC Engineered Solutions 311011605?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the ASC Engineered Solutions 311011605 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.