You may also like
4, 7 & 11 Cbl Tie Kit Natrl Ny
Manufacturer Resources
Product Specs
- Product Family:
- Supplies
- Department:
- Electrical
Metallics CTKS1 – Frequently Asked Questions
1) What cable tie lengths come in the Metallics CTKS1 kit?
The CTKS1 assortment kit covers three lengths of cable tie: 4 inch, 7 inch, and 11 inch. That spread handles small bundles of low-voltage or control wire at 4 inches, typical branch-circuit bundles at 7 inches, and larger conduit or multi-conductor runs at 11 inches, so a service tech can carry one kit instead of three loose bags.
2) Are the ties in the Metallics cable tie kit UV rated for outdoor use?
No. The CTKS1 ties are natural nylon, which is the uncolored indoor grade. For exposed exterior runs, rooftop work, or anywhere in direct sunlight, order black UV-stabilized ties instead; natural nylon chalks and gets brittle with prolonged UV exposure.
3) Will a cable tie assortment kit work for bundling wire inside an electrical panel?
That is the normal use for the CTKS1 kit. The 4 inch ties dress individual conductors and small groups at the terminal strip, while the 7 inch size handles the larger bundles running down the gutter of a panel. All of them are nylon, non-conductive, and intended for dry interior work.
4) What is the Metallics part number for the 4, 7 and 11 inch natural nylon cable tie kit?
Order it as Metallics CTKS1. That single part number covers the whole kit, with 4, 7, and 11 inch natural nylon ties included; there is no separate number per length within the kit.
5) Is a natural nylon cable tie the same thing as a white tie?
Yes, in practice. Natural nylon is the undyed material and reads as off-white or translucent cream, which is what most suppliers list as white. The CTKS1 kit is supplied in natural nylon, so it blends into white or light-colored panels and ceiling spaces rather than standing out the way a black tie does.
6) Do I need a special tool to install the Metallics CTKS1 cable ties?
No tool is required. These are standard one-piece nylon ties with an integral pawl, so you thread the tail through the head and pull by hand, then cut the tail flush with side cutters or a tie-cutting tool. A tension tool only matters when you want repeatable tension across a large job.
How fast can I get the Metallics CTKS1 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics CTKS1 come with a warranty?
Absolutely. The Metallics CTKS1 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics CTKS1?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics CTKS1 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.