Metallics JFW122 4 x 1 in. Fla...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.13
$0.13
Metallics JFW122 4 x 1 in. Flat Head Slotted Wood Screws - Steel Zinc - 100qty

Metallics JFW122 4 x 1 in. Flat Head Slotted Wood Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JFW122
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.13
$0.13
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
4 x 1 in. Flat Head Slotted Wood Screws - Steel Zinc - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Length of Thread: Length = 1 inch then 2/3 thread

  • Features

    • Steel Zinc Material
    • Screws of nominal lengths too short to accomodate the minimum thread length shall have threads extending as close to the underside of the head as practicable.
    • Flat Head with Slotted Drive
    • 4 Diameter, 1" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.1
Division:
Electrical H1
Drive Type:
Slotted
Fastener Head Height:
0.067 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.195 - 0.225 in.
Fastener Length:
1
Language Code:
EN
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.25 lbs
Product Width:
3 in
Screw Point Type:
Tapered Point
Slot Depth:
0.02 - 0.03
Slot Width:
0.031 - 0.039
Sub Division:
Electrical-E H2
Thread Per Inch:
22
Thread Standard:
ASME B18.6.1-1997
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Wood Screw
Type2:
Wood Screw
Series:
JFW
Product Finish:
Zinc
Product Details:
Wood Screw
Product Material:
Steel Zinc

Metallics JFW122 – Frequently Asked Questions

1) Will a #4 x 1 inch flat head screw sit flush when mounting a device plate or a small strike?
Flat head screws seat flush in a countersunk hole, and the JFW122 head measures 0.195 to 0.225 inch across with a head height of 0.067 inch. If the plate you are fastening has a countersink matched to a #4 screw, the head drops level with the surface. A plate with a flat, non-countersunk hole will leave the head proud.
2) How many Metallics JFW122 wood screws come in a pack, and how are they packaged?
The JFW122 ships 100 screws to a jar, and 100 count is the order minimum. Jar packaging keeps loose #4 screws contained on a cart or in a van bin rather than scattering through a bag.
3) How much of the Metallics JFW122 screw is threaded?
At the 1 inch length, roughly two thirds of the shank is threaded, running 22 threads per inch to a tapered point. The unthreaded shank under the head lets the top piece pull tight against the substrate instead of the threads jacking it apart.
4) Do I need a pilot hole for these #4 wood screws?
The JFW122 has a tapered point, not a self-drilling tip, so it is meant to follow a pilot hole in hardwood or near an edge where splitting is a risk. In soft pine or plywood it will usually start on its own. The tapered point is also what lets it draw itself straight into the pilot.
5) What screwdriver bit fits the Metallics JFW122?
Slotted drive only, with a slot 0.031 to 0.039 inch wide and 0.02 to 0.03 inch deep. Use a narrow cabinet-tip flat blade that fills the slot; a wide or thick blade will ride up and cam out of a shallow #4 slot. There is no Phillips or square recess on this screw.
6) Are these zinc wood screws okay for outdoor or damp locations?
The JFW122 is steel with a zinc finish, which handles indoor and dry-location work and gives some corrosion resistance in occasional damp. For sustained exterior exposure, treated lumber, or coastal air, go to a stainless or hot dip galvanized wood screw instead; plain zinc plating will not hold up long term there.
7) Do the Metallics JFW122 screws meet a recognized dimensional standard for ordering against a spec?
Head, slot, and thread dimensions follow ASME B18.6.1, with the thread referenced to ASME B18.6.1-1997. That matters if your submittal calls out a standard wood screw rather than a proprietary fastener, because any #4 x 1 inch flat head slotted screw built to that standard interchanges with it.
8) Is a #4 x 1 inch screw big enough for mounting electrical boxes or conduit straps to wood?
A #4 is a light-gauge screw. It suits small device plates, low voltage brackets, chase nipples, and trim work where the hole is already sized for a #4. For a box or strap carrying real load, step up to a #6, #8, or #10 wood screw. The JFW122 is 1 inch long, so it also needs at least that much sound wood behind the item.
9) Are these Metallics wood screws Buy American or ARRA compliant for a public project?
Metallics flags the JFW122 as compliant on both the ARRA and Buy American attributes, with country of origin China. Verify against the specific procurement clause on your job, since those two designations carry different sourcing tests.
How fast can I get the Metallics JFW122 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFW122 come with a warranty?
Absolutely. The Metallics JFW122 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFW122?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFW122 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!