Metallics JFW127 5 x 1-1/4 in....
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.14
$0.14
Metallics JFW127 5 x 1-1/4 in. Flat Head Slotted Wood Screws - Steel Zinc - 100qty

Metallics JFW127 5 x 1-1/4 in. Flat Head Slotted Wood Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JFW127
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.14
$0.14
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
5 x 1-1/4 in. Flat Head Slotted Wood Screws - Steel Zinc - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Length of Thread: Length = 1 inch then 2/3 thread

  • Features

    • Screws of nominal lengths too short to accomodate the minimum thread length shall have threads extending as close to the underside of the head as practicable.
    • Flat Head with Slotted Drive
    • Steel Zinc Material
    • 5 Diameter, 1-1/4" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.1
Division:
Electrical H1
Drive Type:
Slotted
Fastener Head Height:
0.075 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.22 - 0.252 in.
Fastener Length:
1/1/04
Language Code:
EN
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.4 lbs
Product Width:
3 in
Screw Point Type:
Tapered Point
Slot Depth:
0.022 - 0.034
Slot Width:
0.035 - 0.043
Sub Division:
Electrical-E H2
Thread Per Inch:
20
Thread Standard:
ASME B18.6.1-1997
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Wood Screw
Type2:
Wood Screw
Series:
JFW
Product Finish:
Zinc
Product Details:
Wood Screw
Product Material:
Steel Zinc

Metallics JFW127 – Frequently Asked Questions

1) Will a #5 x 1-1/4 in. flat head screw sit flush in a countersunk hole?
Yes, that is what the flat head is for. The JFW127 head measures 0.22 to 0.252 in. across with a head height of 0.075 in., so a standard countersink for a #5 flat head screw will bring it level with the surface. Use it where a plate, strap, or device cover has to finish flush.
2) Do Metallics JFW127 screws meet a recognized dimensional standard for government or institutional work?
Yes. The JFW127 is made to ASME B18.6.1, with threads to ASME B18.6.1-1997, so head, slot, and thread dimensions are the standard #5 wood screw geometry a spec sheet calls out. Metallics also flags it as ARRA compliant and Buy American compliant; country of origin is China.
3) What screwdriver do I need for Metallics JFW127 wood screws?
A flat blade. These are slotted drive, with a slot 0.035 to 0.043 in. wide and 0.022 to 0.034 in. deep, so a thin cabinet-tip flat screwdriver seats best. There is no Phillips or square recess, so a driver bit set without flat tips will not run them.
4) Are these zinc wood screws OK for outdoor or damp locations?
These are steel with a zinc plated finish, which handles indoor and dry or occasionally damp conditions. Zinc plating is a light sacrificial coating, not a marine or sustained-exposure finish, so for permanent exterior work, treated lumber, or coastal air you want stainless or a hot dip galvanized fastener instead.
5) Is a #5 x 1-1/4 in. wood screw the right size for mounting electrical boxes and device straps to wood studs?
It is a common choice for that kind of work. At #5 diameter and 1-1/4 in. long, the JFW127 gives enough bite into a stud or blocking to hold a box ear, strap, or small bracket while the flat head countersinks flush. For heavier loads such as fixture canopies carrying real weight, step up to a larger diameter screw.
6) What is the part number and how much does a jar of these weigh?
Order it as Metallics JFW127, from the JFW wood screw series. A jar of 100 weighs 0.4 lbs, light enough that a few jars add nothing meaningful to a van load or a shipment.
How fast can I get the Metallics JFW127 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFW127 come with a warranty?
Absolutely. The Metallics JFW127 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFW127?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFW127 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!