Metallics JTS4 4 x 3/4 in. Pan...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.17
$0.17
Metallics JTS4 4 x 3/4 in. Pan Head Combo Sharp Point Tapping Screws - Steel Zinc - 100qty

Metallics JTS4 4 x 3/4 in. Pan Head Combo Sharp Point Tapping Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JTS4
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.17
$0.17
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
4 x 3/4 in. Pan Head Combo Sharp Point Tapping Screws - Steel Zinc - 100qty

  • Features

    • Pan head with Phillips and slotted Drive
    • Steel Zinc Material
    • 4 Diameter, 3/4" Length

  • Additional Notes

    • Other sizes and quantities available by request | Dimensions for #9 diameter are independent of ASME B18.6.4

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.3-2013
Division:
Electrical H1
Drive Type:
Slotted/Phillips
Driver Size:
#1
Fastener Head Height:
0.07 - 0.08 in.
Fastener Head Type:
Pan
Fastener Head Width:
0.205 - 0.219 in.
Fastener Length:
4-Mar
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell C28 - 38
Language Code:
EN
Material Standard:
AISI 1016 - 1024
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Slot-Phil-Combo_Self_Tap.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Diameter:
0.115
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.23 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.053 - 0.071
Screw Point Type:
Gimlet Point
Slot Depth:
0.027 - 0.04
Slot Width:
0.031 - 0.039
Sub Division:
Electrical-E H2
Thread Per Inch:
24
Thread Standard:
ASME B18.6.4
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Type A Tapping Screw
Type2:
Type A Tapping Screw
Series:
JTS
Product Finish:
Zinc
Product Details:
Type A Tapping Screw
Product Material:
Steel Zinc

Metallics JTS4 – Frequently Asked Questions

1) Do Metallics JTS4 screws qualify for a Buy American or ARRA funded project?
No. The JTS4 is not Buy American compliant and is not ARRA compliant; country of origin is listed as multiple. If the job carries a domestic sourcing requirement, this screw will not satisfy it.
2) Can I drive the Metallics JTS4 tapping screw with a flat blade, or do I need a Phillips bit?
Either works. The JTS4 has a combo recess, slotted and Phillips in the same head, so a flat blade or a Phillips driver both seat. For the Phillips side use a #1 driver; the recess diameter is 0.115 in. with a gaging depth of 0.053 to 0.071 in. The slot runs 0.031 to 0.039 in. wide and 0.027 to 0.04 in. deep, so a fine cabinet-tip blade is the right fit, not a wide blade.
3) Are these Metallics tapping screws made to a recognized dimensional standard?
Yes. The JTS4 head dimensions follow ASME B18.6.3-2013 and the thread follows ASME B18.6.4, with material to AISI 1016 to 1024. One caveat Metallics states: dimensions for the #9 diameter in this family are independent of ASME B18.6.4. The #4 x 3/4 in. is not affected by that exception.
4) Will zinc plated steel tapping screws hold up in a damp mechanical room or outdoors?
The JTS4 is zinc plated carbon steel, which is an indoor and sheltered finish. It suits electrical, plumbing, heating and air conditioning work inside a building. For sustained wet exposure, washdown areas, or exterior work, zinc plating will eventually corrode and a stainless fastener is the better call.
5) What thread count do #4 x 3/4 in. Metallics JTS tapping screws have?
24 threads per inch on the #4 diameter. That is the figure to match if you are replacing existing screws in an already-formed hole, since a Type A screw forms its own thread and a different pitch will not track the one already cut.
6) How are the JTS4 screws packaged and what is the minimum order?
They ship in a jar of 100, and 100 is the order minimum. Jar weight is 0.23 lbs. Metallics notes other sizes and quantities in the JTS family are available by request.
How fast can I get the Metallics JTS4 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JTS4 come with a warranty?
Absolutely. The Metallics JTS4 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JTS4?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JTS4 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!