You may also like
4/0 AWG SIMPULL HEAD 24" PULLING DEVICE
Features
- Saves Time
- Staggered lengths
- Available in sizes 1 AWG - 1000 kcmil AWG
- Lowest Profile Available
Manufacturer Resources
Product Specs
- Items In Inner Pack:
- 5
- Batteries Included :
- No
- Batteries Required :
- No
- Commercial Residential:
- Commercial
- Csa Certified:
- No
- Does The Item Contain Mercury :
- No
- Item Extension:
- 12.6
- Item Height:
- 1.6
- Item Weight:
- 0.62
- Item Width:
- 3.9
- Master Pack Height:
- 4.5
- Package Length:
- 29.7
- Packaging Type:
- cardboard
- Product Color:
- Silver
- Product Material:
- Steel
Southwire SPH4/0-24 – Frequently Asked Questions
1) What wire size does the Southwire SPH4/0-24 SIMpull head fit?
The SPH4/0-24 is sized for 4/0 AWG conductor. SIMpull pulling heads are size-specific, so a head for 4/0 won't work on 2/0 or 250 kcmil. Southwire builds the SIMpull head range from 1 AWG up to 1000 kcmil, so match the head to the conductor you are pulling.
2) How much room do I need in the conduit or pull box for a SIMpull head?
The head measures 12.6 inches of extension, 3.9 inches across and 1.6 inches in height, and Southwire calls it the lowest profile pulling head available. That matters in tight pull boxes and on bends where a bulky head or a taped-up basket grip would hang up.
3) Why are SIMpull heads made in staggered lengths?
The heads are built in staggered lengths so the conductors in a multi-wire pull nose into the conduit one behind the other rather than all at the same point. That keeps the bundle front narrow and reduces the jamming you get when several same-length heads enter a bend together. The SPH4/0-24 is the 24 inch version for 4/0 conductor.
4) Should I use a SIMpull head or a basket grip and tape for a 4/0 feeder pull?
A basket grip is the generic option: it fits a range of sizes but you have to tape and tail it, and it builds diameter at the nose. The SPH4/0-24 is a factory head matched to 4/0 that goes on with no taping, keeps the lowest profile, and lets you stagger the conductors so the bundle feeds a bend cleanly. For repeat feeder pulls in commercial work it saves setup time; for one-off odd sizes a grip still has a place.
5) What is the SIMpull pulling head made of, and will it hold up to a rope and winch pull?
Steel construction, silver finish. The eye is intended to take the pulling rope directly from a tugger or winch, which is why the body is steel rather than a cast or plastic nose.
6) Is this pulling head suited to commercial feeder work or residential branch wiring?
It is classified for commercial use. A 4/0 AWG head is sized for service and feeder conductors, not for the 14 to 10 AWG branch circuit wire you would pull in a house.
How fast can I get the Southwire SPH4/0-24 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Southwire SPH4/0-24 come with a warranty?
Absolutely. The Southwire SPH4/0-24 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Southwire SPH4/0-24?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Southwire SPH4/0-24 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.