You may also like
4/0 AWG SIMPULL HEAD 6" PULLING DEVICE
Features
- Available in sizes 1 AWG - 1000 kcmil AWG
- Staggered lengths
- Saves Time
- Lowest Profile Available
Manufacturer Resources
Product Specs
- Items In Inner Pack:
- 5
- Batteries Included :
- No
- Batteries Required :
- No
- Commercial Residential:
- Commercial
- Csa Certified:
- No
- Does The Item Contain Mercury :
- No
- Item Extension:
- 12.6
- Item Height:
- 1.6
- Item Weight:
- 0.62
- Item Width:
- 3.9
- Master Pack Height:
- 4.5
- Package Length:
- 12.6
- Packaging Type:
- cardboard
- Product Color:
- Silver
- Product Material:
- Steel
Southwire SPH4/0-06 – Frequently Asked Questions
1) What wire size does the Southwire SPH4/0-06 SIMpull head fit?
The SPH4/0-06 is sized for 4/0 AWG conductor. Each head is wire-size specific, so a 4/0 head goes on 4/0 cable only. Southwire builds the SIMpull head line in sizes from 1 AWG up to 1000 kcmil, so other conductor sizes in the pull need their matching head.
2) Will a SIMpull head fit through a conduit bend without hanging up?
The head is a low-profile steel device measuring 12.6 by 3.9 by 1.6 inches, and Southwire states it is the lowest profile pulling head available. The 1.6 inch height is the dimension that governs clearance through sweeps and into pull boxes, so check it against the conduit size and fitting you are pulling through.
3) How many SIMpull pulling heads come in a pack?
Inner pack is 5 heads. That matters on a four-conductor pull plus ground, where you need one head per conductor and they all have to be in hand before the pull starts.
4) Why are SIMpull heads made in staggered lengths?
Staggered lengths let multiple heads enter the conduit one behind the other rather than all bunched at the same point, which keeps the bundle slimmer at the nose of the pull. The 6 inch designation in SPH4/0-06 identifies which length in that stagger set you are getting, so on a multi-conductor pull you order different lengths rather than five of the same.
5) Is the SIMpull head a factory-attached device or do I install it in the field?
It is a field-installed pulling device: a steel head you put on the 4/0 conductor end in place of taping and basket-weaving the wires. The time saved is in prep, not in the pull itself. It is rated for commercial work.
6) How much does a 4/0 SIMpull pulling head weigh?
0.62 pounds per head. Light enough that it adds almost nothing to the tension on the rope, which is the point of the low-profile steel design.
7) What is the Southwire part number and UPC for the 4/0 SIMpull head?
Manufacturer part number is SPH4/0-06, UPC 032886888724. The finish is silver steel and it ships in cardboard packaging.
How fast can I get the Southwire SPH4/0-06 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Southwire SPH4/0-06 come with a warranty?
Absolutely. The Southwire SPH4/0-06 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Southwire SPH4/0-06?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Southwire SPH4/0-06 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.