You may also like
4IN D PAK LLBODY W/CV & GASKET
Manufacturer Resources
Product Specs
- Application:
- For Use with Rigid/IMC Conduit
- Number Of Batteries:
- 0
- Product Group:
- Conduit & Fittings
- Product Type:
- Conduit Body - Series A - Rigid/IMC
- Department:
- Electrical
- Product Subgroup:
- Conduit Bodies
- Product Material:
- Aluminum Die Cast
Red Dot DALL-10-CG – Frequently Asked Questions
1) What conduit type does the Red Dot DALL-10-CG LL conduit body work with?
The DALL-10-CG is built for rigid and IMC conduit, threaded hubs, not EMT. It's a Series A style body, so it threads directly onto rigid or intermediate metal conduit runs. If your run is EMT, you need a set-screw or compression style body instead.
2) Does the Red Dot DALL-10-CG come with a cover and gasket, or do I have to order those separately?
Cover and gasket are both included with the DALL-10-CG, so the body arrives ready to close up. You don't need a separate cover kit or gasket to finish the pull point.
3) What does the LL in Red Dot DALL-10-CG mean, and when should I use it instead of an LB or LR body?
LL means the opening is on the left side as you face the body with the conduit running away from you. Use an LL where the run has to turn left at a 90 to clear an obstruction or enter a wall; an LB turns back into the wall behind the body, and an LR turns right. All three are pull points, not junction boxes for splices.
4) Is the Red Dot DALL-10-CG aluminum or iron?
Die cast aluminum. That keeps the weight down on an overhead or long conduit run and avoids the rust you get from a damaged iron body, but it also means you should keep it away from direct contact with dissimilar metals and from corrosive environments where a PVC-coated or malleable iron body is specified.
5) Can I use the Red Dot DALL-10-CG to splice wires inside?
No. A conduit body like this is a pull and routing point. Conductors pass through it so you can make the bend and pull the wire, and the gasketed cover lets you get back in later. Splicing in a conduit body is restricted by code based on the body's marked volume, so use a proper box when you need to make connections.
6) What is the Red Dot part number and conduit size for this LL body with cover and gasket?
Red Dot DALL-10-CG, a 4 inch LL conduit body supplied with cover and gasket. Order by that number if you're matching existing bodies on a run; it is the identity a distributor or supply house will look up.
How fast can I get the Red Dot DALL-10-CG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Red Dot DALL-10-CG come with a warranty?
Absolutely. The Red Dot DALL-10-CG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Red Dot DALL-10-CG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Red Dot DALL-10-CG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.