Metallics JRM74SLT 5-40 x 1-1/...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.34
$0.34
Metallics JRM74SLT 5-40 x 1-1/2 in. Round Head Slotted Machine Screws - Steel Zinc - 100qty

Metallics JRM74SLT 5-40 x 1-1/2 in. Round Head Slotted Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JRM74SLT
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.34
$0.34
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
5-40 x 1-1/2 in. Round Head Slotted Machine Screws - Steel Zinc - 100qty

  • Additional Notes

    • In 1985, Metallics was the first fastener company in America to offer a full line of Combo’s! | Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

  • Features

    • Round head with slotted Drive
    • Steel Zinc Material
    • 5-40 Diameter, 1-1/2" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Division:
Electrical H1
Drive Type:
Slotted
Fastener Head Type:
Round
Fastener Length:
1/1/02
Hardness:
Rockwell B70-B100
Language Code:
EN
Material Standard:
AISI 1006 - 1022
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Round_Head_Machine_Screw.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.39 lbs
Product Width:
3 in
Sub Division:
Electrical-E H2
Tensile Strength:
60000 psi minimum
Thread Per Inch:
40
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
JRM
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JRM74SLT – Frequently Asked Questions

1) What thread size and length are the Metallics JRM74SLT machine screws?
The JRM74SLT is a 5-40 machine screw, 1-1/2 inches long, with 40 threads per inch. The 5-40 size is a #5 diameter machine screw thread, so it takes a #5-40 tapped hole or nut, not a sheet metal or wood application.
2) Are these Metallics round head slotted screws Buy American compliant?
Metallics lists the JRM74SLT as both Buy American and ARRA compliant, with China as the country of origin. If your project spec requires domestic melt and manufacture rather than the compliance designation, confirm that distinction with your specifier before submitting.
3) Will zinc plated steel machine screws hold up outdoors or in a damp location?
The JRM74SLT is zinc plated carbon steel, which is meant for dry interior work such as device and enclosure assembly. Zinc plating gives limited corrosion resistance and will rust in wet, exterior, or washdown conditions. For those openings use a stainless machine screw of the same 5-40 x 1-1/2 size instead.
4) How strong is a 5-40 steel zinc machine screw from the Metallics JRM series?
Rated at 60,000 psi minimum tensile strength, with a hardness of Rockwell B70 to B100. The steel is in the AISI 1006 to 1022 range, which is low carbon steel, so these are general purpose fasteners rather than a substitute for a graded high strength screw in a structural or vibration-loaded connection.
5) How are the Metallics 5-40 slotted machine screws packaged and what is the minimum order?
They ship in a jar of 100 pieces, and 100 count is the order minimum. The packed jar weighs 0.39 lbs. Metallics notes other sizes and quantities are available by request.
6) Is a round head slotted screw the right choice, or should I use a flat head?
Round head sits proud of the surface with a domed crown, so it is for through-bolting plates, straps, and covers where no countersink exists. If the part is countersunk and the head has to finish flush, a round head will not seat, and you need a flat head screw in the same 5-40 x 1-1/2 size. The slotted drive here matches a standard flat blade screwdriver, which is the common field driver on electrical device work.
7) Can I use these for electrical device and enclosure assembly?
That is exactly the intended use. Metallics groups the JRM74SLT with its electrical supply fasteners, and a 5-40 slotted round head in a 1-1/2 inch length is used for mounting devices, covers, plates, and hardware into tapped holes in boxes and enclosures. At 1-1/2 inches it is a long shank, so make sure your tapped hole or nut engagement is deep enough to take the full thread or you will have excess screw standing out behind the connection.
How fast can I get the Metallics JRM74SLT delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JRM74SLT come with a warranty?
Absolutely. The Metallics JRM74SLT is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JRM74SLT?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JRM74SLT from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!